Roland VS-880EX Quick Start Manual page 49

1
2
f
3
4
5
Turn off the power of the VS-880EX, and disconnect all cables con-
nected to the unit.
Remove the front panel cover from the VS-880EX, and remove the
two screws located on either side of the installation slot.
With the warning sticker on the hard disk facing upward, slide it
gently into the installation slot, and press it firmly all the way in.
When doing so, let the grooves of the installation hardware slide
along the protruded part of the VS-880EX's chassis.
When the hard disk has been pressed all the way in, use the
screws that you removed to fasten the hard disk in place.
After folding down the handle on the front of the hard disk, re-
attach the panel cover as it was originally.
Now, you completed installing internal hard disk.
Appendices
49