Roland VS-880EX Quick Start Manual page 27

The upper line of the display will indicate "V.Track=," allowing you to select the
V-track.
Tracks on which sound
has been recorded
CONDITION MARKER#
At this time, the bar display will indicate the V-tracks on which sound
MEMO
has been recorded, and the V-track which is selected for each track.
1–8 in the horizontal axis are the track numbers, and 1—8 in the verti-
cal axis are the V-track numbers.
A
sound has been recorded in that V-track. In the above display, sound
has been recorded in V-Tracks 1 of Tracks 1 and 2.
A
that V-track is selected. In the above display, V-track 1 is selected for
all tracks 1–8.
4
Use the TIME/VALUE dial to select the V-track for recording or
playback. Here, select "2."
CONDITION MARKER#
5
Press [PLAY (DISPLAY)].
The initial display reappears.
6
Now you have set up V-Track2 of Track1 for recording. Record
and check the content by following the procedure described in
"Recording to the Tracks" (p. 15).
For more detailed information, please refer to "Auxiliary Tracks for
Each Track" (Owner's Manual p. 30).
V-Track Bank
TIME
INPUT TRACK AUX
displayed on the upper line of the V-track number indicates that
displayed on the lower line of the V-track number indicates that
TIME
INPUT TRACK AUX
Basic Operation (Multi-Track Recording)
V-Track
dB
0
4
12
24
48
MASTER
dB
0
4
12
24
48
MASTER
27