Buick 2005 Park Avenue Owner's Manual page 179

RECALL: Press this button to see which track is
playing. Press it again within five seconds to see how
long it has been playing. To change the default on
the display, track or elapsed time, press this button until
you see the display you want, then hold this button
until the display flashes. The selected display will now
be the default.
AM-FM: Press this button to listen to the radio when a
CD is playing. The inactive CD will remain safely
inside the radio for future listening.
SOURCE: Press this button to play a cassette tape or
a CD when listening to the radio. TAPE SIDE and
an arrow will appear on the display. If this button is
pressed again, the system will go to CD play; CD PLAY
will appear on the display.
w x
SEEK : Press the up or the down arrow to go to
the previous or to the next track on the CD.
EJECT: Press this button, located next to the CD slot,
to stop a CD when it is playing and to remove a CD
when it is not playing. Eject may be activated with the
radio off. CDs may be loaded with the ignition and radio
off if this button is pressed first.
CD Messages
E (Error): The CD may not play and an E along with a
number may appear on the display for one of the
following reasons:
•
You are driving on a very rough road. When the
road becomes smooth, the CD should play.
•
It is very hot. When the temperature returns to
normal, the CD should play.
If E20 appears on the display and the CD comes out, it
could be for one of the following reasons:
•
The CD is dirty, scratched, wet, or upside down.
•
The air is very humid. Wait about an hour and
try again.
•
There may have been a problem while burning
the CD.
•
The label may be caught in the CD player.
If the CD is not playing correctly, for any other reason,
try a known good CD.
If any error occurs repeatedly or if an error cannot be
corrected, contact your dealer. If your radio displays an
error number, write it down and provide it to your
dealer when reporting the problem.
3-65