Erasing All Settings - To Reset The Commander To Its Factory Settings - Sony RM-VL610A Operating Instructions (RM-VL610A Remote Commander®) Operating Instructions Manual

Erasing All Settings
— To reset the
Commander to its
factory settings
You can erase all remote control
signals programmed by the
"learned" function to reset the
Commander to its factory settings.
1
While holding POWER
pressed, press INPUT and
VOL –.
When pressing the POWER
button and the INPUT button,
all the Component Select
buttons go off. When pressing
the VOL – button while
holding down the POWER
button and the INPUT button,
the SET indicator lights up and
the Component Select buttons
light up one by one. When the
SET indicator turns off at last,
all settings are cleared, and the
Commander returns to its
original state.
35