Buick 2002 Regal Owner's Manual page 236

A. Clean the area around the engine oil fill tube and cap
before removing. Twist the oil fill tube, with cap
attached, counterclockwise and remove it.
B. If you have the supercharged engine, remove the nut
in the center of the cover shield.
C. Lift the engine cover shield at the front, slide the
catch tab out of the engine bracket and remove the
cover shield.
D. Put the oil fill tube, with cap attached, in the valve
cover oil fill hole until you're ready to replace the
cover shield.
4. After the engine
There is one bleed valve. It is located on the
thermostat housing.
5. Fill the radiator
cools, open the
coolant air
bleed valve.
with the proper
R
-
DEX COOL
coolant mixture, up
to the base of the
filler neck. See
"Engine Coolant"
in the Index for
more information
about the proper
coolant mixture.
5-19