Turn Signal And Lane Change Indicator - Buick 2000 Regal Owner's Manual

Turn Signal and Lane Change Indicator

The turn signal has the following positions: two upward
(for right) and two downward (for left). These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will
return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
If the arrow flashes faster than normal as you signal a
turn or a lane change, a signal bulb may be burned out
and other drivers won't see your turn signal.
2-36
An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check for burned
the fuse (see "Fuses and Circuit Breakers" in the Index).
A chime will sound if you leave your turn signal on for
more than 3/4 mile (1.2 km).
Headlamp High/Low Beam Changer
To change your headlamps from low beams to high
beams, or high to low, pull the multifunction lever all
the way toward you. Then release it.
-
out bulbs and then check
When the high beams
are on, this indicator light
located on the instrument
panel cluster will also be on.