Updating The Firmware Using Tftp - ADTRAN 604 System Manual

DLP-7 Updating the Firmware using TFTP
Introduction
The Total Access 6XX supports firmware updates using TFTP or XMODEM. (Use the
Ethernet port and TFTP from a network server, or use XMODEM and the rear
DLP provides the steps for a successful firmware upgrade using the
TFTP server. (See DLP-8, Updating the Firmware using XMODEM, for instructions on using XMODEM.)
Tools and Materials Required
• A PC with Telnet client software
• A TFTP server accessible on the local network
A TFTP server is provided as part of the ADTRAN Utilities software suite supplied with
your shipment.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling
modules, put on an antistatic discharge wrist strap to prevent damage to electronic
components. Place equipment in antistatic packing material when transporting or storing.
When working on equipment, always place it on an approved antistatic mat that is
electrically grounded.
61200624L1-1B © 2004 ADTRAN, Inc.
10/100BASET
interfaces.) This
CRAFT
Ethernet port and a
10/100BASET
203