3.5-Inch Hard Drive Assembly; Removing 3.5-Inch Hard Drive Assembly - Dell OptiPlex XE3 Tower Service Manual

2. Install the
a. front bezel
b. side cover
3. Follow the procedure in

3.5-inch hard drive assembly

Removing 3.5–inch hard drive assembly
1. Follow the procedure in
2. Remove the:
a. side cover
b. front bezel
3. To remove the hard drive assembly:
a. Disconnect the hard drive assembly cables from the connectors on the hard drive.
NOTE: Ensure to remove the SATA blue cable first, to ease in removing the hard drive data cable.
16 Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.