Standard Cmos Setup Page - IBM M768MR User Manual

Standard CMOS Setup Page

Use this page to set basic information such as the date and time,
the IDE devices, and the diskette drives. If you press the F3 key,
the system will automatically detect and configure the hard disks
on the IDE channels.
AMIBIOS SETUP – STANDARD CMOS SETUP
©1998 American Megatrends, Inc. All Rights Reserved
Date (mm/dd/yy) : Tue Jan 27, 2000
Time (hh/mm/ss) : 14:26:53
Type Size Cyln Head WPcom Sec Mode Mode Mode Mode
Pri Master : Auto
Pri Slave : Auto
Sec Master : Auto
Sec Slave : Auto
Floppy Drive A : 1.44MB 3 1/2"
Floppy Drive B : Not Installed
Month : Jan – Dec
Day : 01 – 31
Year : 1901 – 2099
Date & Time Use these items to set the system date and time
Pri Master Use these items to configure devices connected
to the Primary and Secondary IDE channels. To
Pri Slave
configure an IDE hard disk drive, choose Auto. If
Sec Master
the Auto setting fails to find a hard disk drive, set
Sec Slave
it to User, and then fill in the hard disk
characteristics (Size, Cyls, etc.) manually. If you
have a CD-ROM drive, select the setting
CDROM. If you have an ATAPI device with
removable media (e.g. a ZIP drive or an LS-120)
select Floptical.
Floppy Drive A Use these items to set the size and capacity of
Floppy Drive B the floppy diskette drive(s) installed in the
system.
3: BIOS Setup Utility
LBA Blk PIO 32Bit
On
On
On
On
ESC : Exit
 : Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color
F3 : Detect All HDD
23