Install The Mainboard - IBM M768MR User Manual

M768MR Mainboard User's Manual

Install the Mainboard

Install the mainboard in a system chassis (case). The board is a
micro-ATX size mainboard with a twin-tier of I/O ports. You can
install this mainboard in any ATX case. Special micro-ATX cases
are also available with a reduced number of expansion slot bays
and a smaller power supply unit. Ensure that your case has an I/O
cover plate that matches the ports on this mainboard.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
1. Connect the power connector from the power supply to the
ATX1 connector on the mainboard.
2. If there is a cooling fan installed in the system chassis, connect
the cable from the cooling fan to the CASFAN1 fan power
connector on the mainboard.
3. Connect the case switches and indicator LEDs to the PANEL1
switch and LED connector header.
14
ATX1
CASFAN1
1
PANEL1