B1-Board (Video Processing)
The circuits located on the B1-Board perform all video processing
functions. It is the WEGA engine. The following circuits are included on
the board.
• Composite/Component Processor (CCP)
• Digital Reality Creator (DRC)
• Image Format Processor (IFP)
• WE Microprocessor (part of the IFP)
QM-Board
The QM-Board performs the following functions.
•
ASTC Signal Processing and Control
•
ATI Microprocessor
o The ATI microprocessor becomes the Main microprocessor
(the TV Micro on the A1-Board is the standby micro) after
initial power on. All user settings are store in an EEPROM
on the QM-Board.
QT-Board
The QT-Board contains the ATSC and NTSC Tuner. The ATSC IF signal
and NTSC demodulated video and audio signals are outputs from this
board.
Optical Block
The Optical Block includes the C-Board, prisms, mirrors, SXRD panels
and lenses necessary to process and modulate the lamp light and display
the video information on the screen.
TVP-23
2. PCB & Component Locations and Descriptions
C-Board
The C-Board circuits perform the following primary functions.
•
Gamma Correction
•
White Balance Correction
•
SXRD Panel Drive
•
Panel Temperature Sensor
S1-Board
Ambient Temperature Sensor IC
S2-Board
Lamp Temperature Sensor IC
T-Board
Lamp Door Switch
H1-Board
•
Channel Up/Down Button
•
Volume Up/Down Button
•
Input Select Button
•
Menu Button
H2-Board
Front LED's (Timer, Lamp, Power)
H3-Board
Front AV Input (Component, Composite, Audio LR)
25