Self Check (Error History Display)
To access the Error History Display take the following
steps:
Enter Service mode [Display] + [5] + [Vol. -] + [Power]
The complete Error history for the TV is immediately
display. This is the only display in this Service Mode .
The display includes the Power LED flash pattern down
the right side column , the error description down middle
column, and the number of times the error occurred down
the left side column .
To RESET the error number column press 8 – Enter The
error history display should be reset after each repair to
enable the TV to detect new failures .
TVP-23
Self Check (Error History) Display
Appendix
101