Option Code Setting - Samsung NS140HHXEA Service Manual

4-2 Option code Setting

In order to set the indoor unit option code using the wired remote controller, hold down the
buttons at the same time for 5 seconds.
1 The menu will display .
Press the button to enter the indoor unit option code
mode.
• The first digit represents the page number and the remaining five
digits are option codes.
2 Press the
button to change the page. You can change the
page from 0 to 3.
3 Press the
buttons and the
option code in order.
• The option code which is currently setting will flicker.
4 Press the
button to save the changed setting.
You will move to the menu selection display.
• Press the button anytime during setup to exit without setting.
• Option code will not be applied if you don't press the
• Setting indoor unit option code is only possible in Master wired remote controller.
You can only check the indoor unit option code in Slave wired remote controller.
• Setting indoor unit option code is possible when one indoor unit is connected. If more than 2 indoor
units are connected, you can only check the Master indoor unit option code.
Model
NS100HHXEH
NS125HHXEH
NS140HHXEH
NS155HHXEH
NS180HHXEH
4-4
All manuals and user guides at all-guides.com
button to set the
Page No.
Option code
button.
Option code for indoor unit
011014-15624F-276470-370000
011034-156123-277D8C-370000
011034-116189-278CA0-370000
011034-116189-279BAA-370000
011074-1660C6-27B4D2-370000
and
Samsung Electronics