Icom IC-7100 Quick Start Manual page 7

Channel Frequency
A01 146.565 (S)
A02 145.770 (S)
A03
A04
A05
A06
A07
A08
A09
A10
A11
A12
A13
A14
A15
Programming a Memory Channel. Bank A is reserved for frequently-used frequencies
and settings used in emergency operations. If you have personal preferences for
frequencies and/or preferences that you wish so save for future use, you may use Banks B
through E for that purpose. Please do not overwrite any of the settings in the Call
Channels or Bank A memories.
While memory channels may be programmed in memory mode, it may be less confusing
to use the VFO mode to program a memory channel.
Touch the channel number or VFO/MEMO icon on the right side of the touch screen to
select VFO A or B. Set the desired contents into the VFO as described earlier in this
Quick-Start Guide.
When the radio is configured as desired, press the MENU button repeatedly until you
reach the Menu-1 screen. Rotate the BANK (outer) and/or M.CH (inner) knob on the left
side of the front panel to select the desired storage location. Touch the MW soft key for 1
second to program the selected memory channel.
If you wish to assign an alphanumeric name to your memory channel, you can do this
after you have programmed the VFO information into the channel. Please refer to Page
11-10 of the IC-7100 Advanced Instructions manual for details.
CTCSS Power
none 100%
none 100%
7
Use
MC ACS preferred simplex
Winlink via WN3R-10