Adding A Track Mark - Sony MZ-N707 OpenMG Jukebox NOTES on installing & operating Operating Instructions Manual

3
Press . or > repeatedly until
"EDIT" flashes in the display, and
then press ENTER.
4
Press . or > repeatedly until
" : Move" flashes in the display,
and then press ENTER.
You can now move the selected
group.
5
Press . or > repeatedly to
select the destination point on the
disc, and then press ENTER.
To cancel moving
Press CANCEL in step 5.

Adding a track mark

You can add track marks so that the part
after the new track mark is counted as a
new track. The track numbers will
increase as follows:
You cannot add a track mark on a track
that has been checked-out from your
computer.
1 2
Add a track mark
1 2 3
Track numbers increase
3 4
4 5
T MARK
1
While playing or pausing an MD,
press T MARK (T MARK) at the
point you want to mark.
"MARK ON" appears in the display,
and a track mark is added. The track
number will increase by one.
To add track marks while
recording (except while
synchro-recording)
Press T MARK (T MARK) at the point
you want to add a track mark.
You can use Auto Time Stamp to add
track marks automatically at specified
intervals (except while digital recording)
(page 32).
T MARK
53
-GB