Adding A Track Mark - Sony MZ-N707 Operating Instructions Manual

3
Press I44 or w repeatedly until
"EDIT" flashes in the display, and
then press ENTER.
4
Press I44 or w repeatedly until
" B : Move" flashes in the display,
and then press ENTER.
You can now move the selected
group.
5
Press HI or w repeatedly to
select the destination point on the
disc, and then press ENTER.
To cancel moving
Press CANCEL in step 5.
Adding a track mark
You can add track marks so that the part
after the new track mark is counted as a
new track. The track numbers will
increase as follows:
You cannot add a track mark on a track
that has been checked-out from your
computer.
Add a track mark
Track numbers increase
T MARK
1
While playing or pausing an MD,
press T MARK (T MARK) at the
point you want to mark.
"MARK ON" appears in the display,
and a track mark is added. The track
number will increase by one.
To add track marks while
recording (except while
synchro-recording)
Press T MARK (T MARK) at the point
you want to add a track mark.
You can use Auto Time Stamp to add
track marks automati-
.._ i, : ,z-. 7 ,,,_ ,
intervals (except while digital recording)
(page 32).
53-GB