Changing The Order Of A Group On A Disc (Group Move); Adding A Track Mark - Sony MZ-N505 Operating Instructions Manual

1
2
3
4
5
6
Press GROUP for 2 seconds or more.
"A" lights up in the display group
mode turns on.
While playing the track you want to
move, press MENU.
Press tf( or w repeatedly until
"EDIT" flashes in the display, and
then press ENTER.
The recorder plays the selected track
repeatedly.
Press I44 or w repeatedly until
"T:Move" flashes in the display, and
then press ENTER.
Press H( or w repeatedly until
the destination group flashes in the
display, and then press ENTER.
Press I44 or FH repeatedly until
the number of the destination track
within the group flashes in the
display, and then press ENTER.
cancel moving TO /
Press CANCEL in step 5.
Adding a track mark
Changing the order of a
group on a disc (Group
Move)
l
Insert a disc with group settings
MENU/ENTER
GROUP/
CANCEL
1
2
3
4
5
TO
Press GROUP for 2 seconds or more.
" b " lights up in the display and
group mode turns on.
While playing a track within a group
whose order you want to change,
press MENU.
Press I44 or FH repeatedly until
"EDIT" flashes in the display, and
then press ENTER.
Press I44 or w repeatedly until
"G:Move" flashes in the display, and
then press ENTER.
You can now move the selected
group.
Press HI or w repeatedly to
select the destination point on the
disc, and then press ENTER.
cancel moving
Press CANCEL in step 5.
You can add track marks so that the part
after the new track mark is counted as a
new track. The track numbers will
increase as follows:
You cannot add a track mark on a track
that has been checked-out from your
computer.
Add a track mark
Track numbers increase
&&GB