Preparing A Power Source - Sony MZ-DH10P Operating Instructions Manual

Preparing a Power
Source
Charge the rechargeable battery before using
it for the first time or when it is depleted. To
maintain the original battery capacity longer,
charge the battery only when it is completely
depleted.
Since the supplied USB cradle is for this
player only, you cannot charge other model
using this cradle.
Operations can be done on the player or the
remote while charging.
1
Slide and open the battery
compartment lid in the direction of
the arrow.
2
Insert the rechargeable battery.
Insert it starting with the
terminal end and with the label side facing
front
 / 
terminal
14
 
and
3
Close the lid.
4
Connect the AC power adaptor to
the USB cradle and the AC power
adaptor to a wall outlet.
back of the USB cradle
to DC IN
6V jack
5
Place the player on the USB cradle
and push it in firmly.
6
Make sure that the CHG lamp on the
player lights up.
Charging of the battery starts.
CHG
lamp
to a wall outlet
AC power adaptor
(supplied)