Power Button And Indicator; Record Button And Indicator; Paper Advance Button; Mark/Offset Button - GE Corometrics 170 Series Operator's Manual

Power Button and Indicator

Record Button and Indicator

Paper Advance Button

Mark/Offset Button

Mark

Offset (Models 172, 173, and 174 Only)

Revision D
Controls, Indicators, and Connectors: Front Panel Controls
Pressing the blue Power button turns the monitor on and illuminates the green
indicator to the left of the button. Pressing the button again puts the monitor in
standby and extinguishes the indicator.
Pressing the Record pushbutton activates the recorder, provided paper is installed;
the amber indicator illuminates to the left of the button. Pressing the button again
turns the recorder off and extinguishes the indicator.
Pressing the Paper Advance button causes the recorder to advance chart paper at a
rate of 40 cm/min for as long as the button is pressed. If the recorder is on, twenty
seconds after the button is released, the recorder prints the time, date, active trends
legends, and chart speed.
The Mark/Offset button is a multifunction button:
Briefly pressing the button prints an event mark
heart rate grid.
When the heart rate offset mode is enabled, pressing and holding the Mark/Offset
button for at least two seconds shifts the secondary FHR trend +20 BPM for
visibility purposes. You will hear a "beep" for confirmation. Refer to
Rate Offset" on page 5-5
170 Series Monitor
2003023-001
on the bottom two lines of the
for more information.
"Fetal Heart
3-3