Cleaning Carpets And Area Rugs - Bissell POWERFORCE POWERBRUSH PET XL Quick Start Manual

Cleaning Carpets and Area Rugs

Visit support.BISSELL.com for helpful how-to carpet cleaning videos.
Tips Before Cleaning
• Use a dry vacuum cleaner over area before using your deep cleaner.
• To prevent damage to Berber carpets, avoid repeated strokes in the same area.
• Before cleaning area rugs, check the manufacturer's tag and test an inconspicuous spot on the
rug for colorfastness. Don't use on silk or delicate rugs.
• It is common to refill the Clean Water Tank and empty the Dirty Water Tank multiple times during
cleaning. Room size and cleaning speed both affect how often the tank may need to be refilled
and/or emptied.
1.
Plug into a properly
grounded outlet.
4.
Make cleaning passes. Repeat these passes until solution
being pulled up appears clean.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back
Note: When solution is flowing, bubbles will form at the edges of the nozzle. Holding the trigger
continuously may result in overwetting your carpet.
6 BISSELL.com
2.
Press the power button to
turn the machine ON.
2. Release Spray Trigger
• 1 pass forward
• 1 pass back
3.
Press the recline pedal with
your foot.
Hold the Spray Trigger for 10
seconds to prime the system
with cleaning solution.
5.
When finished, turn
machine OFF.