Cleaning Carpets And Area Rugs - Bissell POWERCLEAN DUALPRO PET 3072 Manual

Cleaning Carpets and Area Rugs

Visit support.BISSELL.ca for helpful how-to carpet cleaning videos.
Tips Before Cleaning
• Use a dry vacuum cleaner over area before using your deep cleaner.
• To prevent damage to Berber carpets, avoid repeated strokes in the same area.
• Before cleaning area rugs, check the manufacturer's tag and test an inconspicuous spot on the
rug for colorfastness. Don't use on silk or delicate rugs.
• It is common to refill the Clean Water Tank and empty the Dirty Water Tank multiple times during
cleaning. Room size and cleaning speed both affect how often the tank may need to be refilled
and/or emptied.
1. 2.
Plug into a properly Select cleaning mode based
grounded outlet. on the below chart.
4. 5.
Press the recline pedal with Make forward and backward
your foot. passes based on your selected
cleaning mode. See "Cleaning
Hold the Spray Trigger for 10
Modes & Instructions" below.
seconds to prime the system
with cleaning solution.
Note: When solution is flowing, bubbles will form at the edges of the nozzle. Holding the trigger
continuously may result in overwetting your carpet.
Cleaning Modes & Instructions
Deep Clean Mode Express Clean Mode
Delivers a deep clean to Provides a lighter clean that dries in
your carpet. about 30 minutes.
1. Hold Spray Trigger 1. Hold Spray Trigger
• 1 pass forward • 1 pass forward
• 1 pass back • 1 pass back
2. Release the Spray Trigger 2. Release the Spray Trigger
• 1 pass forward • 1 pass forward
• 1 pass back • 1 pass back
6 BISSELL.ca
3.
Press the power button to
turn the machine ON.
6. When finished, turn
machine OFF.