Filling The Clean Water Tank - Bissell POWERFORCE POWERBRUSH PET XL Quick Start Manual

Filling the Clean Water Tank

More of a video person? Head to support.BISSELL.com for helpful how-to videos.
Note: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. Do not
use boiling water. Do not heat water or tank in microwave.
1.
The Clean Water Tank is on
the top of the machine.
4.
Fill the Clean Water Tank with water and formula.
Cleaning Formula
Fill with hot tap water to the
Water Fill Line above Carpet
Cleaning. Add formula to the
Formula Fill Line above Carpet
Cleaning. If you're using a
Boost formula additive, add
two ounces to your tank.
5.
Screw the cap back onto
the Clean Water Tank.
2.
Lift the Clean Water Tank
straight up to remove from the
machine.
Trial-Size Antibacterial
Formula
Fill with hot tap water to the
Water Fill Line below the Easy
Fill line. Add Antibacterial
formula to the
NOTICE: BISSELL Antibacterial
formula is only for BISSELL
machines with Easy Fill
System.
6.
Align tank with grooves on
the machine. Slide tank down
into place.
3.
Unscrew the yellow cap
from the Clean Water Tank.
For Future Use with Full-Size
Antibacterial Formula with
Easy Fill System
Fill with hot tap water to the
Water Fill Line below the Easy
Fill line. Twist the yellow cap
line.
back onto the tank. Firmly
insert the formula bottle
into the cap on the tank and
squeeze until formula reaches
the
step 6.
NOTICE: BISSELL Antibacterial
formula is only for BISSELL
machines with Easy Fill
System.
line and skip to
BISSELL.com 5