Advertisement
02/11/2021 22:41
background. The settings are then automatically saved.
Phone setup with system software 9.xx and higher:
Settings are no longer required for using the headset on the phone. After
correctly adapting the phone plug, a headset symbol must now appear in
the "phone display". Should the headset symbol not appear, please check
the following settings:
Menu > Settings > Phone > Phone plug > Activate/select headset.
Phone setup with system software below 9.xx:
Important: The "Force Headset" function should not be activated on the
phone, as otherwise it will not be possible to accept external calls!
Menu > Settings > Phone > Phone plug > Force headset OFF
Menu > Settings > Phone > Socket > Activate headset
Dial tone signal transfer / phone setup:
Important: The dial tone signal in the headset is only transmitted if one of
the following call tones has been selected on your phone Standard /
Classic / Cold River / Dooing-Dooing . > Menu > Settings > Dial tone >
Internal / External
In the event that you still do not have a dial tone signal transfer despite
setting the correct ring tone, check the following settings:
Menu > Settings > Phone > Internal/External > other options
No tone, Progressive, Bleep tones > all items must be set to "OFF".
Calls over the headset can be connected/forwarded as follows:
https://www.jabra.ca/supportpages/jabra-gn9125/9129-808-215/faq/d8f5ef13-c0f4-4e7a-
Page 4 of 5
99c5-558f443e1d45
Advertisement
