E-Mu 404 Tutorials Manual page 8

Tutorials
Steinberg Cubase LE
channel (strip). Make sure the PatchMix input channel (strip) matches the Cubase
LE Track Input.
If your input signal is either too weak or too strong, adjust your input source or the
8.
Digital Audio System gain controls.
Record a Track
Press Record on the Cubase LE Transport control and start playing.
9.
Press Stop when you're finished recording the first track.
10.
Press the R eturn-to-Zero button
11.
Press Play on the Cubase Transport to play back your track. The audio from Cubase
12.
comes back into PatchMix on the ASIO Out 31/32 Strip.
Record Another Track
Press the Return to Zero button
13.
Add another track by selecting Add Track , from the Project menu. Select Audio .
14.
A new audio track is added. Notice that the red Record Enable button has been
15.
automatically turned on in the new track. (If you wish to record multiple tracks
simultaneously, simply turn Record Enable on for each track you wish to record.)
Again, set up the track to be either mono or stereo , then choose the Track Input
16.
routing. The input can be the same one you used for the first track or you can
choose a different input.
Save your Project
Choose Save As... from the Cubase LE file menu to save your project. Choose a
17.
name and location that will make the project easy to find later.
To record into Cubase LE, you must have a PatchMix session containing these 4 basic
components:
a) a physical input strip for your input source.
b) an ASIO Send on the physical input strip (so that Cubase can receive your input).
c) an ASIO output strip for Cubase to output its audio back through PatchMix.
d) an output assigned to any physical output (to your monitor speakers).
8
Return-To-Zero Stop
on the Cubase Transport.
on the Cubase Transport.
Play Record
f A quick way to record
additional tracks using
the same input is to
simply drag the Part
(audio region) you just
recorded down to
another location in the
Cubase Arrange window,
then hit Record again
and go.
Creative Professional