Cakewalk Sonar Le; Setting Up Sonar Le - E-Mu 404 Tutorials Manual

Cakewalk Sonar LE

Sonar LE is a professional tool for authoring sound and music on your computer. Sonar
supports Wave, AIFF, ASIO, MP3, ACIDized waves, WMA and other audio formats.
The following step by step tutorials are designed to get you recording on Sonar LE. After
you have finished the tutorial we encourage you to read the Sonar LE pdf manual in
order to learn about the many features of this comprehensive program.
We have provided a special PatchMix DSP Session, as well as a Sonar LE Recording
Project to go along with the following tutorial.

1 - Setting up Sonar LE

Follow these instructions carefully to ensure that Sonar LE runs smoothly the first time.
Sonar LE will remember these settings, so you'll only have to do this once.
Setup the Audio Options
Choose the (0404) Sonar LE session from the Start -> Programs menu. The path
1.
is: (Program Files\Creative Professional\E-MU PatchMix DSP\VST\Recording
Templates). Sonar LE will launch and load the Project.
Select Audio... from the Options menu. The following dialog box appears.
2.
Set the Audio Settings as shown in the dialog boxes above. Select E-MU ASIO.
3.
In the General section of the dialog box, select ASIO Panel. The pop-up dialog box
4.
shown at right appears.
Set the ASIO Buffer Latency to 10 ms or less. A low latency setting is important to
5.
assure fast MIDI response time and to minimize delay when monitoring through
Sonar. Click OK.
Close the Audio Options screen by selecting OK.
6.
Note: If the Sonar LE application crashes for any reason, it is recommended that you
reboot the computer
E-MU 0404 PCI Digital Audio System
3. Set the
ASIO Buffer
Latency.
1. Click on the
Advanced Tab
to access the
next window.
2. Set the
Driver Mode
to ASIO.
Tutorials
Cakewalk Sonar LE
E Note: A PatchMix
Session containing ASIO
Sends and Returns must
be loaded BEFORE you
launch Sonar LE.
19