Steinberg Cubase Le; Setting Up Cubase Le - E-Mu 404 Tutorials Manual

Tutorials

Steinberg Cubase LE

Steinberg Cubase LE
Steinberg Cubase LE is a 24-bit/96kHz multi-track audio/MIDI recorder with high-
quality effects, automation, virtual instruments (VSTi) and many other professional
features.
The following step-by-step tutorials are designed to get you recording as quickly as
possible. After you have finished the tutorial we encourage you to read the Cubase LE
pdf manual in order to learn about the many features of this powerful program. We
have provided a PatchMix DSP Session, as well as a special Cubase LE Project to go
along with the following tutorials.

1 - Setting up Cubase LE

Follow these instructions carefully to ensure that Cubase LE runs smoothly the first
time. Cubase LE will remember these settings, so you'll only have to do this once.
Open Cubase LE from the Start menu or by double-clicking the desktop icon. An
1.
ASIO multimedia driver test dialog box will pop up to ask if you want to run the
ASIO test. Choose No, because you won't be using the driver anyway.
Select Device Setup... from the Devices menu.
2.
Select VST Multitrack from the list and the following screen appears.
3.
In the Setup section of the dialog box, select E-MU ASIO as the ASIO Driver. A pop
4.
up dialog box asks, "Do you want to switch the ASIO driver?" Select Switch .
Click the Control Panel button. The pop-up dialog
5.
box shown at right appears.
Set the ASIO Buffer Latency to 10 ms or less. A low
6.
latency setting is important to assure fast MIDI
response time and to minimize delay when
monitoring through Cubase. Click OK .
Make sure the Direct Monitoring box is Unchecked .
7.
Close the Device Setup screen by selecting OK .
8.
Close Cubase LE by clicking the
9.
the application even if you're going to continue with
the tutorials, in order to "lock-in" your Preference
settings.)
6
button. (Close
Creative Professional