Thermal Solution Assembly - AMD A85X Chipset User Manual

4. Open the socket by
pulling the level
sideways away from the
socket and then upwards
to a 90-degree angle.

2-3-3 Thermal Solution Assembly

1. Apply a thin and even layer of
thermal grease upon the APU HIS
surface.
3. Make sure that the fastener of
other side of the FAN clipped into
another mounting lug on the opposite
side of stand. Then pull the level as
to the right as the photo show above
to fasten the fan.
5. Insert compatible APU
into APU socket and see
to it that APU Pin-1
should be matched into
APU socket Pin-1 during
installation.
2. Put cooling fan upon APU HIS
surface and see to it that the fastener
of one side of the FAN clipped into the
mounting lug of stand for APU FAN
installation.
4. Insert power connector of cooling
fan to APU fan header of the
motherboard.
8
6. Put the level to the
original place of the
socket. Make sure that
the notched corner
should point towards
the end of the level.