Connecting To The Base Station - Sony LF-B1 Operating Instructions (LF-PK1) Operating Instructions Manual

Connecting to the
Base Station
You can watch TV, videos, and DVDs by starting
LocationFree Player and connecting to the base
station.
The procedure to watch TV at home is the same
as the procedure to watch TV away from home.
Before starting LocationFree Player
Check that the base station is turned on. Also,
make sure that your computer is connected to
your home LAN, when watching at home, or to
the Internet, when watching away from home.
Starting NetAV
1
Double-click the
icon on the desktop of the computer.
You can also use the [Start] menu. Point to
[All programs] ([Programs] in Windows
2000), [Sony LocationFree Player], and then
click [LocationFree Player].
2
Click a base station from the list, and then
click [Connect] on the [Base Station
Selection] screen.
Select a green icon.
The following screen appears and the
computer begins establishing a connection
to the base station.
(LocationFree Player)
Click this button.
25
When the connection is established, a TV
picture appears.
About the icons that appear in the list
Green icon:
The base station is located within the same LAN.
A base station in the same LAN always has a
green icon, regardless whether you connect to it.
Light green icon:
The base station is on the Internet but you have
connected to it in the past (e.g., the base station is
at home).
z
Tip
If you have connected to your base station at home
before, and then connect to it away from home, the
color of the icon is light green.
Quitting the Watching
Session
Closing the Connection with the
Base Station
Click anywhere in the window to display the
lower bar, then click [Disconnect] at the bottom
left of the window.
[Disconnect]
Quitting LocationFree Player
Click anywhere in the window to display the
lower bar, then click
the window.
(Close) at the top right of