Sony LF-B1 Operating Instructions (LF-PK1) Operating Instructions Manual page 16

4
Enter the WEP key printed on the sticker of
the base station and then click [Connect].
Proceed to STEP1-3 (1 page 16).
STEP 1-3
Display TV on your
LocationFree device
Before you register your computer with the base
station and display TV on the computer, you need
to install LocationFree Player on the computer
(1 page 32).
1
With the base station powered on, press the
[SETUP MODE] button on the rear panel of
the base station. Keep pressing until the
SETUP MODE LED starts blinking.
The SETUP MODE LED blinks.
SETUP MODE
LED
z
Tip
When using a router to connect to the base
station, it takes a while for the IP address to be
assigned to the base station by DHCP. The base
station does not appear in the window shown in
Step 2 until the IP address has been assigned.
Proceed to Step 2 after the NETWORK LED
turns on.
16