Adjusting The Video Rate - Sony LF-B1 Operating Instructions (LF-PK1) Operating Instructions Manual

Selecting a Secondary Audio
Program (SAP)
The secondary audio program (SAP) mode is
available for broadcasts that include multiple
audio tracks.
When a TV program with multiple audio tracks is
tuned in, click [SAP] repeatedly at the bottom of
the window to switch among audio tracks.
Each time the [SAP] button is clicked,
[STEREO] or [SAP] appears on the window.
z
Tip
To select an SAP option for external equipment, use
the remote supplied with the connected equipment.
However, some devices can be operated with the on-
screen remote control.
Adjusting the Video
Rate
You can adjust the streaming rate according to the
bandwidth available on your communications
connection. This allows you to watch video with
the optimum quality.
Normally, selecting [Auto] sets the optimal video
rate in accordance with available bandwidth.
When selecting a rate manually, note that a higher
rate results in higher picture quality, but a higher
(larger number) rate requires a larger bandwidth
and video will tend to keep stopping and starting
if there is insufficient bandwidth for the higher
rate.
1
Click [Rate] at the bottom of the window.
The [Change Rate] window appears.
2
Click a rate, and then click [OK].
Manual
Note
When you switch between [Auto] and [Manual],
change the rate from [1] or [6] to another rate, or
change from another rate to [1] or [6] while
connected, the NetAV connection may be
disconnected and then reconnected automatically
in some cases.
27
rate