Setting The Equalizer (Eq3); Connecting Auxiliary Audio; Equipment - Sony CDX-V3800 Operating Instructions Manual

Setting the equalizer (EQ3)

You can select an equalizer curve for 7 music
types (XPLOD, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM and OFF (equalizer
OFF)).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a desired
source.
2
Press (EQ3) repeatedly to select the
desired equalizer curve.
Each time you press (EQ3), the item
changes.
To cancel the equalizing effect, select "OFF."
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for different tone ranges.
1
Press (SOURCE) to select a desired
source.
2
Press (EQ3) repeatedly to select the
desired equalizer curve.
3
Adjusting the equalizer curve.
1 Press (SEL) repeatedly to select the
desired tone range.
Each time you press (SEL), the tone range
changes.
LOW t MID t HI (t BAL t FAD t
LPF t SUB t AUX )
2 Press the volume +/– button
repeatdly to adjust to the desired
volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
3 Repeat step 1 and 2 to adjust the
equalizer curve.
To restore the factory-set equalizer curve,
press (SEL) for 2 seconds.
Note
When EQ3 is set to "OFF," you cannot adjust the
equalizer curve settings.
18

Connecting auxiliary audio

equipment

You can listen to the sound from your car
speakers by connecting optional Sony portable
devices.
Selecting auxiliary equipment
Press (SOURCE) repeatedly to select
"AUX."
Adjusting the volume level
You can adjust the volume for each connected
audio equipment.
1
Press (SEL) repeatedly to select
"AUX."
2
Press the volume +/– button to select a
desired volume level.
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
To deactivate auxiliary equipment in
the source display
1
Press (OFF).
CD/VCD playback or radio reception stops.
2
Press (SEL) repeatedly until "AUX-
ON" appears.
3
Press the volume +/– button to select
"AUX-OFF."