Configuration Tables; Category 1, Aircraft/Mode Type Select - Honeywell BENDIX KING KMH 880 System Installation Manual

B
STEP
(CATEGORY) SELECTION
Selects:
a) Altitude Monitor
Display Disable
8 b) Altitude Monitor
Call out Disable
c) Altitude Monitor
Disable
9 Selects:
a) TA&D alternate
Pop Up

4.2.3.8 Configuration Tables

The Category columns define a category (or group) of functions or input devices that are
selected through ID Numbers. The Category Number identifies the subsection where the
details are defined. For example Air Data, Category 2, is identified in Table 4-3 and Posi-
tion Input Source, Category 3, is defined in Table 4-4.

4.2.3.8.1 Category 1, Aircraft/Mode Type Select

The following table provides identification of the basic mode types and associated
parameters.
In this category only the following parameters are to be defined:
• Basic mode alert and warning thresholds
ID
0
1
Page 4-6
SIGNAL
Using Table 4-9 and any sub-tables
contained within, select the desired
True or False Condition for Altitude
Monitor Display Disable, Altitude
Monitor Callout Disable, and Alti-
tude Monitor Disable.
Using Table 4-10 and any sub-
tables contained within, select the
desired True or False condition for
TA&D Alternate Pop Up.
Table 4-1 Configuration Identification
Aircraft/Mode Type
0
1
Table 4-2 Aircraft / Mode Type Select
INSTRUCTION
Description
TSO-C151a Class B curve set -001 -001
Non-TSO curve set #1
10609I00.ZIPCDL
KMH 880/KTA 870
Record the Ident (ID
No.) on the space
available on Ident
column of this table.
Record the Ident (ID
No.) on the space
available on Ident
column of this table.
Effectivity
App. Cfg.
-001 -001
Rev 0, October/2000
IDENT.
NO.
_____
ID #
_____
ID #