Naming Inputs - Sony STR-DG600 Operating Instructions Manual

8
Press control button V/v
repeatedly to select the input
you want the component video
input selected in step 6 to be
reassigned to (for example,
VIDEO 1).
In this case, select "DVD–VD1".
When you press VIDEO 1, the image
from the component connected to the
VIDEO 1 jacks will be a component
image. The input you can reassign to
varies for each component video input.
For details, see "Assignable inputs for
component video input" below.
To return to the previous display
Press control button B.
Assignable inputs for
component video input
Component Assignable
video input inputs
DVD VIDEO 1
VIDEO 3
DVD
MD/TAPE
SA-CD/CD
AUX
VIDEO 2 VIDEO 1
VIDEO 2
VIDEO 3
MD/TAPE
SA-CD/CD
AUX
Notes
• You cannot reassign more than one component
video input to the same input.
• You cannot use the component video input as the
original input when it has been reassigned to
another input.
72
US
Display
DVD–VD1
DVD–VD3
DVD–DVD
DVD–MD
DVD–CD
DVD–AUX
VD2–VD1
VD2–VD2
VD2–VD3
VD2–MD
VD2–CD
VD2–AUX

Naming inputs

You can enter a name of up to 8 characters for
inputs and display it on the receiver's display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
"1-LEVEL" appears on the display.
3
Press control button V/v
repeatedly to select either
"5-AUDIO" or "6-VIDEO".
4
Press the control button or
control button b to enter the
menu.
5
Press control button V/v to
select "NAME IN".
6
Press the control button or
control button b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
"To create an index name" (page 64).
To return to the previous display
Press control button B.