Performing Auto Calibration - Sony STR-DG600 Operating Instructions Manual

Tips
• You can also fix the optimizer microphone to a
tripod (not supplied) and place the tripod at your
listening position.
• Be sure to remove any obstacles in the path
between the optimizer microphone and the
speakers.
• When you face the speaker towards the optimizer
microphone, you will get a more accurate
measurement.

Performing Auto Calibration

TV ?/1
RM SET UP
SYSTEM STANDBY SLEEP
VIDEO1 VIDEO2
Input
buttons
MD/TAPE SA-CD/CD TUNER
2CH A.F.D.
1 2
CATEGORY
4 5
AUDIO ANGLE
TUNING
7 8
MEMORY SUBTITLE
. >
>10/11
0/10
D.TUNING
m M
ANT CLEAR SEARCH MODE
X
H
TOP MENU/
GUIDE
F
Control
G
button
f
DISPLAY RETURN/EXIT
TV VOL TV CH
Press AUTO CAL.
The following appears on the display.
A.CAL [5] t A.CAL [4] t A.CAL [3] t
A.CAL [2] t A.CAL [1]
?/1
AV ?/1
?/1
P
switch
VIDEO3 DVD
AUX
MULTI CH
MOVIE MUSIC
3
DUAL CATEGORY
MONO MODE
6
JUMP/ PRESET/
TIME CH/D.SKIP
9
ENTER
12
DISC ALT
-
x
MUTING
AV MENU
MUTING
MASTER
VOL
g
MASTER
VOL +/–
O
TV/ AMP
VIDEO MENU
AUTO
WIDE
CAL
AUTO
CAL
The table below shows the display when
measurement starts.
Measurement for
Environment noise level
Speaker connection
Speaker level
Speaker distance
* The corresponding speaker indicator lights up in
the display during measurement.
When measurement ends, "COMPLETE"
appears on the display and the settings are
registered.
Notes
• Auto Calibration cannot detect the sub woofer.
Therefore, all sub woofer settings will be
maintained.
• You cannot select Auto Calibration when
headphone is connected.
• The measurement process will take a few minutes
to complete.
Tips
• When Auto Calibration starts:
– Stand some distance from the speakers and the
listening position to avoid measurement failure.
This is because test signals are output from the
speakers during measurement.
– Avoid making noise to get a more accurate
measurement.
• The Auto Calibration function will be canceled
when you do the following during the
measurement process:
– Press ?/1, input buttons or MUTING.
– Change the volume level.
– Press AUTO CAL again.
Display
NOISE.CHK
MEASURE and SP
DET. appears
alternately*
MEASURE and
GAIN appears
alternately*
MEASURE and
DISTANCE appears
alternately*
33
US