Resetting Sound Fields To The Initial Settings; Tuner Operations; Listening To Fm/Am Radio - Sony STR-DG600 Operating Instructions Manual

Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1,2
?/1
TUNING MODE
– +
TUNING
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
MEMORY/ CATEGORY
ENTER MODE
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R DIGITAL(OPT)
1
Press ?/1 to turn off the power.
"TURNING" and "OFF" appears on the
display alternately and then
"COMPLETE" appears.
2
While holding down 2CH, press
?/1.
"S.F. CLR." appears on the display and all
sound fields are reset to their initial
setting.
60 US
MASTER VOLUME
MULTI CHANNEL DECODING
DISPLAY INPUT MODE
INPUT SELECTOR
CATEGORY 2CH A.F.D. MOVIE MUSIC MULTI CH IN
2

Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas to the receiver (page 29).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
DIRECT
details on area codes, see page 3.
Area code
U, CA
* The AM tuning scale can be changed (page 85).
FM AM
100 kHz 10 kHz*