Sony STR-DG600 Operating Instructions Manual page 14

Name Function
AUDIO Press to change the sound to
Multiplex, Bilingual or Multi
channel TV sound of the TV,
VCR, DVD player, satellite
tuner, Blu-ray disc recorder,
hard disc recorder, or PSX.
ANGLE
Press to select the viewing
angle or change the angles of
the DVD player or Blu-ray
disc recorder.
JUMP/TIME
Press to
– toggle between the previous
– show the time or display the
MEMORY Press MEMORY to store a
station.
SUBTITLE Press ALT (G) and then press
SUBTITLE to change the
subtitles of the DVD player.
ENTER Press ALT (G) and then press
ENTER to enter the value
after selecting a channel, disc
or track using the numeric
buttons.
Numeric Press ALT (G) and then press
buttons the numeric buttons to
– preset/tune to preset
– select track numbers of the
– select channel numbers of
>10/11 Press ALT (G) and then press
>10/11 to select track
numbers over 10 of the CD
player, VCD player, LD
player, MD deck, tape deck,
TV, VCR, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner.
14 US
and the current channels of
the satellite tuner, TV, or
Blu-ray disc recorder.
playing time of a disc, etc. of
the CD player, MD deck,
VCD player, or DVD player.
stations.
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
the TV, VCR, satellite tuner,
Blu-ray disc recorder, hard
disc recorder, or PSX.
Name Function
wj Input buttons Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components following the
steps in "Programming the
remote" on page 75.
Button
VIDEO1
VIDEO2
VIDEO3
DVD
MD/TAPE MD deck
SA-CD/CD Super Audio CD/CD
TUNER
AUX
wk TV ?/1
Press to turn the TV on or off.
wl RM SET UP
Press to set up the remote.
a)
The MASTER VOL +, TV VOL +, TV CH + and
H buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
• The 12 button on the remote is not available for
receiver operation.
Assigned Sony
component
VCR (VTR mode 3)
VCR (VTR mode 1)
VCR (VTR mode 2)
DVD player
player
Built-in tuner
Not assigned