Table of Contents
Advertisement
The detail explanation of the SIP and Port settings window:
The port number used to send/receive SIP message for building a
SIP Port
session. The default value is 5060 and this must match with the peer
Registrar when making VoIP calls.
Enter the domain name (or IP address) of your registered SIP
Registrar
Registrar server.
You can enter domain name or IP address of SIP proxy server. If this
Proxy
setting value is the same as Registrar, please press "Duplicate".
You can enter domain name or IP address of SIP URL. e.g., if SIP
Domain/Realm
URL is sip:63065@fwd.pulver.com, then this field contains
fwd.pulver.com. If this setting value is the same as Registrar, please
press "Duplicate".
This setting defines whether the Vigor2200V/VG NAT traversal
Stun Server
mechanism is enabled (by checking checkbox) or not. If activated,
please also specify IP address of STUN server. Under this mode,
VoIP communication from Vigor2200V/VG can pass through with the
specified STUN server behind firewall/NAT.
With the Registrar domain entered above, check this box to let the
Use Registrar
Vigor2200V/VG use the SIP Registrar.
This field contains a name or a number which easily let you identify
Display Name
the person who you wan to call. It can also be the name for SIP
display.
Enter your SIP username (the first part of your SIP address before the
Account
@ sign)
Name
This field contains a name or a number. It is also the name for SIP
Authorization
Authorization. If this setting value is the same as Display Name,
User
please press "Duplicate".
Your SIP URL address as provided when you registered with a SIP
Password
service.
The time duration that your SIP registrar server keeps your
Expire Time
registration record. Before the time expires the Vigor will issue
another register message to registrar server again.
23
Advertisement
Table of Contents
