Switching Off - Master BC35 User And Maintenance Book

the graduated scale, placed at the side of
the appliance (Fig. 4), in order to prevent
risks.
►4.1.3. Close the tank door (Fig. 5).
►4.1.4. Connect the power plug to the mains
(Fig. 6).
►4.1.5. Press the "ON/OFF"/"POWER" button
to switch on the appliance (Fig. 9).
►4.2. CONTROL PANEL, USE AND
FUNCTIONS FOR MODEL BC35 (Fig.
7):
►ON/OFF: It allows switching on or off the
appliance.
►SPEED: Allows increasing or decreasing the
appliance ventilation speed. Three speeds
can be selected LOW, MID and HIGH.
►COOL: It enables or disables the cooling
mode.
►MODE: It enables one of the following
operation modes:
►NATURAL: It enables or disables the mode
simulating the natural trend of the wind.
►SLEEP: Enables or disables three sub-
modes:
1° When the appliance runs at LOW speed,
no power variation occurs.
2° When the appliance runs at MID speed, it
maintains a constant power for 30 minutes,
then it switches to LOW speed automatically.
3° When the appliance runs at HIGH speed,
it maintains a constant power for 30 minutes,
then switches to MID automatically, running
for another 30 minutes and fi nally it switches
to LOW speed automatically.
►HEALTH: It enables or disables the
ionisation mode, i.e. Release of negative
ions into the environment, in order to make
the air healthier.
►SWING: It enables or disables the automatic
vertical oscillation of the fl aps to direct the
air fl ow.
►TIMER: It enables or disables the timer of
the appliance automatic switch-off. Intervals
can be of half-hour up to 12 hours.
►LIGHT: It enables or disables the monitor
rear illumination.
►4.2. CONTROL PANEL, USE AND
FUNCTIONS FOR MODEL BC60 (Fig.
8):
►POWER: It allows switching on or off the
appliance.
Figures and texts of this book are protected by COPYRIGHT.
►SPEED: Allows increasing or decreasing the
appliance ventilation speed. Three speeds
can be selected LOW, MID and HIGH.
►COOL: It enables or disables the cooling
mode.
►SWING: It enables or disables the automatic
vertical oscillation of the fl aps to direct the
air fl ow.
►ANION: It enables or disables the ionisation
mode, i.e. release of negative ions into the
environment, in order to make air healthier.
►TIMER: It enables or disables the timer of
the appliance automatic switch-off. Intervals
can be of half-hour up to 12 hours.
►4.3. SWITCHING OFF:
►4.3.1. Press the "ON/OFF"/"POWER" button
to switch off the appliance (Fig. 9).
►4.3.2. Empty the tank using the drain cap
(Fig. 11-12-13).
►►5. CLEANING AND
MAINTENANCE
WARNING: BEFORE
ANY MAINTENANCE
DISCONNECT THE POWER CABLE FROM
THE MAINS.
DEPENDING ON
WHERE THE APPLIANCE IS USED, DUST,
DIRT OR WATER QUALITY CAN AFFECT
THE PERFORMANCE
THEREFORE, CLEANING THE FOLLOWING
COMPONENTS CAN BE NECESSARY:
►►5.1. TANK:
We recommend changing
frequently.
►5.1.1. Switch off the appliance and disconnect
the plug from the mains (Fig. 9-6).
►5.1.2. Empty the tank using the drain cap
(Fig. 11-12-13).
►►5.2. FILTERS (for model BC60):
We recommend cleaning fi lters frequently.
WARNING: Dirty fi lters can affect the
performance of the appliance.
►5.2.1. Switch off the appliance and disconnect
the plug from the mains (Fig. 9-6).
►5.2.2. Remove the fi lters upwards (Fig. 14).
►5.2.3. Clean the fi lters using a mild detergent
and a clean cloth (Fig. 15). Ensure the fi lter
is fully dry.
►5.2.4. Place the fi lter back into its housing
(Fig. 16).
PERFORMING
OR REPAIR,
THE ENVIRONMENT
OF THE UNIT.
the water
GB