Blaupunkt BLP9180-002 User Manual page 12

I / Bluetooth operation
1) Switch on the speaker, enter Bluetooth mode. At the same time, the speaker prompts the voice to "enter
Bluetooth" and connects with the Bluetooth device according to the prompt.
2) Switch on the relevant Bluetooth devices (smart phone, tablet PC and other devices) ，connect the Bluetooth
name "BLP9180". After success, the speaker prompts the voice "Connect Successfully".
3) After the connection is successful, the music can be played through the sound box, function LED indicator
light shows slow flash.
4) Adjust the volume by means of a device or knob.
5) You can switch to TF and AUX IN mode by pressing the "M" button.
II / TF operation
1) Insert TF ,the speakers to the playback status automatically.
2) Choose the music by buttons adjust the volume by knob.
3) You can switch to Bluetooth and AUX IN mode by pressing the "M" button.
III / AUX IN operation
1) Connect speakers and devices (smart phone, tablet PC and other devices) through 3.5mm dual terminal
audio line.
2) Press the "M" button to switch to the audio input mode and play the music.
3) You can switch to Bluetooth and TF mode by pressing the "M" button.
TWS function manual
1) The mode requires the use of two speakers of the same model
2) Pair one of the speakers with a Bluetooth compatible source device (smartphone, tablet or other
device). Make sure that the Bluetooth connection is made correctly.
3) Turn on the second speaker, and press the "M" button on each of the speakers simultaneously.
A confirmation notification will be issued by each of the speakers to indicate that the connection is
complete.
4) When the connection is successful, the music is played through the two speakers.
5) Adjust the volume at the source device or the speaker wheel.
6) You can switch to TF and AUX IN modes by pressing the "M" button.
Dag Technologie®, herby declares that this equipment conforms to the essential requirements and other relevant
provisions of Directive 2014/53/UE. The declaration of Conformity can be viewed at the following address:
http://www.mms-support.net/OTA/ECD_DAG_BLP9180-002.pdf
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household
electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be
collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the
impact on human health and the environment. The crossed out "wheeled bin" symbol on the product reminds you of
your obligation, that when you dispose of the appliance, it must be separately collected.
Declaration of conformity UE