LG LUWM101HWA Owner's Manual page 36

36 OPERATION
Locking/Unlocking the Control Panel
1
Turn on the power.
2
Touch Control Lock in the Settings screen to
activate/deactivate this function.
Washer Pairing (Optional)
Select this to (un)pair the Main Washer and the
Mini Washer.
• This option is available when the Main Washer
is used with the Mini Washer.
1
Press the Power button.
2
Swipe the display down to see the Settings
screen and select More Settings. Select
Washer Pairing from the Settings menu.
3
Press the Pair button.
• When pairing is done, a popup window will
appear in the display.
If pairing fails, follow these steps:
1
Make sure the Mini Washer is plugged in.
2
Reset the Mini Washer:
Press the Power button on the Mini Washer.
Press and hold Normal and Tub Clean at the
same time for 7 seconds.
3
If pairing fails several times, reset both the
Main Washer and Mini Washer.
See the Factory Data Reset section for
instructions on resetting the Main Washer.
• When 0 appears on the display, repeat Step 2.
• When the reset is complete, a number that is 1
or above is displayed. Try pairing again by
referring to Washer Pairing.
Switching Between Main and Mini Washer
When the Main Washer and Mini Washer are
paired, this function allows you to switch the
controls between the two washers. Swipe down to
open the Settings screen to select Main Washer or
Mini Washer.
NOTE
• This feature is available only when the Mini
Washer is connected.
• The cycles in Main Washer and Mini Washer are
available at the same time. When both washers
are running, the following display appears.
Factory Data Reset
Select this to delete all the stored data and reset to
the default settings.
1
Press the Power button.
2
Swipe down on the display to open the
Settings screen and select More Settings.
Select Factory Data Reset from the Settings
menu.
3
Press Reset.