Table of Contents
Advertisement
Available languages
Available languages
• Do not overload the appliance by stuffing too
many articles into the drum. Items must be able
to tumble freely.
• If you open the door and remove the load before
the appliance has finished its cycle, remember to
press the Start/Pause button.
• After the end of dry,
ENd
Woolen Articles
Do not tumble dry woolen articles. Pull them to
their original shape and dry them flat.
Woven and Loopknit Materials
Some woven and loopknit materials may shrink, by
varying amounts, depending on their quality.
Always stretch these materials out immediately
after drying.
Permanent Press and Synthetics
Do not overload your appliance. Take out
permanent press articles as soon as the appliance
stops to reduce wrinkles.
Baby Clothes and Nightgowns
Always check the manufacturer's instructions.
Blankets and Duvets
Check fabric care labels on blankets and duvets
before using the drying cycle. Heated drying may
cause some blankets and duvets to shrink.
Rubber and Plastics
Do not dry any items made from or containing
rubber or plastics, such as:
• Aprons, bibs, chair covers
• Curtains and tablecloths
• Bath mats
Fiberglass
Do not dry fiberglass articles in the appliance.
Glass particles left in the appliance may be picked
up by your clothes and cause skin irritation.
Cycle
Wash+Dry
is displayed.
Dry Options
Wash Temp
Default: Normal
Default: Warm
Available: All
Available: All
NOTE
• It is normal for the dryer fan motor to run for
about 60 seconds after the dry cycle is stopped.
• Be careful when removing your clothing from
the appliance, as the clothing or appliance may
be hot.
• The estimated drying time varies from the actual
drying time for sensor dry cycles. The type of
fabric, size of the load, and the dryness selected
affect drying time.
• The Dry Only cycle begins by spinning the
clothing to extract water and save energy.
Using Dry Cycles
Using a Wash and Dry Function
1
Prepare the laundry and load the drum.
• For consistently dry loads, all articles in the
load should be similar in material and
thickness.
• Do not overload the drum. Items must have
room to tumble freely.
2
Press the Power button.
3
Select a Wash+Dry cycle.
4
Add detergent.
5
Touch the Add Drying
modifier's screen and change the default dry
setting.
6
Press the Start/Pause button.
NOTE
• Delay Wash, Rinse can be selected for every
cycle in this table.
Spin Speed
Default: Very High
Available: Extra
High, Very High,
High
OPERATION
31
button to open the
a
Soil Level
Default: Normal
Available: All
Advertisement
Table of Contents
