Removing and Installing the Keyboard
Keyboard Removal Procedure
1. Turn off the computer, remove the battery
2. The keyboard adhesive mylar will be visible at point
the keyboard
(Figure
3a).
3. Open it up with the LCD on a flat surface before pressing at point
cial eject stick
to do this) while releasing the keyboard in the direction of the arrow
4
a.
b.
3
4
(page 2 -
5).
on the computer. Pull the adhesive mylar
1
1
2
5
2
to release the keyboard module (use the spe-
3
as shown
5
Removing and Installing the Keyboard 2 - 7
Disassembly
Figure 3
Keyboard Removal
a. Remove the adhesive
mylar from the keyboard.
out to release
b. Use a special eject stick
to push the keyboard out
while releasing the key-
(Figure
3b).
board as shown.
4. Eject Stick