1. Manuals
  2. Brands
  3. Intel Manuals
  4. Laptop
  5. Notebook
  6. User manual

Intel Notebook User Manual

Notebook
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Intel Notebook

Summary of Contents for Intel Notebook

  • Page 3 Macrovision Corporation, and is intended for home or other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineer- ing or disassembly is prohibited. Intel and Intel Core are trademarks/registered trademarks of Intel Corporation.

  • Page 4: Fcc Statement

    Preface FCC Statement (Federal Communications Commission) You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 5: Fcc Rf Radiation Exposure Statement

    Preface FCC RF Radiation Exposure Statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

  • Page 6: Important Safety Instructions

    Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury to persons when using any electrical equipment: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

  • Page 7: Instructions For Care And Operation

    Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.
  • Page 8 Preface Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work.

  • Page 9: Power Safety

    Preface Power Safety The computer has specific power requirements: • Only use a power adapter approved for use with this computer. • Your AC/DC adapter may be designed for international travel but it still requires a Power Safety steady, uninterrupted power supply. If you are unsure of your local power specifications, Warning consult your service representative or local power company.

  • Page 10: Battery Precautions

    • Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode. • Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qual- ified service personnel.

  • Page 11: Cleaning

    Preface Cleaning Do not apply cleaner directly to the computer; use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. Servicing Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the computer to electric shock.

  • Page 12: Travel Considerations

    Power Off Before Traveling Make sure that your notebook is completely powered off before putting it into a travel bag (or any such container). Putting a notebook which is powered on in a travel bag may cause the vent(s)/fan intake(s)/outlet(s) to be blocked. To prevent your...
  • Page 13 Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very common. Don’t check it with normal luggage. Baggage handlers may not be sufficiently careful. Avoid knock- ing the computer against hard objects.
  • Page 14 Preface Developing Good Work Habits Developing good work habits is important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.

  • Page 15: Lcd Screen Care

    Preface Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. • Position the display to avoid glare or reflections from overhead lighting or outside sources of light. • Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly. •...
  • Page 16 Preface...

  • Page 17: Table Of Contents

    Preface Contents Notice .................I Inserting the AC/DC Adapter Cable ......1-8 FCC Statement .............II System Map: LCD Panel Open - Model A ....1-9 FCC RF Radiation Exposure Statement: ....III System Map: LCD Panel Open - Model B ....1-10 Instructions for Care and Operation ......V LED Indicators ............1-11 Power Safety .............VII Hot Key Buttons ............1-12...
  • Page 18 Preface ExpressCard Slot ............2-7 New Battery ..............3-12 Inserting and Removing ExpressCards .......2-7 Recharging the Battery with the AC/DC Adapter ..3-12 TouchPad and Buttons/Mouse ........2-8 Proper handling of the Battery Pack ......3-13 Audio Features ...............2-9 Battery FAQ ..............3-14 Adding a Printer ............2-10 Drivers &...
  • Page 19 3.5G Module ...............4-7 Boot-time Diagnostic Screen (Advanced Menu) ..5-10 Fingerprint Reader Module ........4-7 Legacy OS Boot (Advanced Menu) ......5-10 Intel Turbo Memory Technology Driver ....4-7 Power On Boot Beep (Advanced Menu) .....5-10 Battery Low Alarm Beep (Advanced Menu) ....5-10 BIOS Utilities Fan Control (Advanced Menu) ........5-10...
  • Page 20 Intel® Wi-Fi Link 5100/5300 Series Interface (Ports & Jacks) (802.11 a/g/n) Driver Installation .......7-6 802.11 b/g WLAN Driver Installation ......7-7 Notebook Ports and Jacks ..........A-2 Connecting to a Wireless Network ......7-8 Intel Video Driver Controls Windows Mobility Center .........7-11 PC Camera Module ............7-12 Intel Video Driver Installation ........
  • Page 21 Preface Audio ................C-3 The Power Sources ............. D-16 Keyboard & Pointing Device ........C-3 AC/DC Adapter ............D-16 Interface ................ C-3 Battery ..............D-16 Card Reader ..............C-3 Turning on the Computer ..........D-17 ExpressCard Slot ............C-3 Power Schemes ............D-18 Mini-Card Slots ............
  • Page 22 Preface...

  • Page 23: Quick Start Guide

    • Appendix A Definitions of the interface, ports/jacks which allow your computer to communicate with external devices. • Appendix B Information on the Intel Video driver controls. • Appendix C The computer’s specification. • Appendix D Information on the Windows XP OS.

  • Page 24: Model Differences

    Quick Start Guide Model Differences This notebook series includes two different model types (there are also some designs styles that include aluminum top covers) which differ slightly in design style and LCD size (see “Specifications” on page C - 1). Note that your model’s color may appear different from those pictured throughout this manual (the power and hot key buttons will...

  • Page 25: Advanced Users

    Quick Start Guide Advanced Users If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful to refer to “What to Install” on page 4 - “BIOS Utilities” on page 5 - 1 “Upgrading The Computer”...

  • Page 26: Not Included

    Chapter 4 for installation instructions. Ports and Jacks “Notebook Ports and Jacks” on page A - 2 for a description of the interface (ports & jacks) which allow your com- puter to communicate with external devices, connect to the internet etc.

  • Page 27: System Software

    Quick Start Guide System Software Your computer may already come with system software pre-installed. Where this is not the case, or where you are re-configuring your computer for a different system, you will find the following operating systems are sup- ported.

  • Page 28: System Startup

    Remove all packing materials, and place the computer on a stable surface. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports. Attach the AC/DC adapter to the DC-In jack on the left of the computer (see over), then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter.

  • Page 29: Operating System Setup

    [Enabled] Power On Boot Beep [Disabled] Battery Low Alarm Beep: [Disabled] If you have included an Intel Turbo Memory FAN Control: [Automatic] module in your purchase configuration you will Only available if Windows Vista need to enable DFOROM (Robson) Support is selected as the O/S.

  • Page 30: Inserting The Ac/Dc Adapter Cable

    Quick Start Guide Inserting the AC/DC Adapter Cable Take care when connecting the AC/DC adapter cable into the DC-In jack on the computer. The combination of some case designs and AC/DC adapters will expose part of the end of the adapter cable when connected to the DC-In jack (see Figure 1 - 3);...

  • Page 31: System Map: Lcd Panel Open - Model A

    Quick Start Guide System Map: LCD Panel Open - Model A Figure 1 - 4 LCD Panel Open - Model A Wireless Device Built-In PC Camera Operation Aboard Aircraft (Optional) The use of any portable electronic transmission devices aboard aircraft is Speakers usually prohibited.

  • Page 32: System Map: Lcd Panel Open - Model B

    Quick Start Guide System Map: LCD Panel Open - Model B Figure 1 - 5 LCD Panel Open - Model B Wireless Device Built-In PC Camera Operation Aboard Aircraft (Optional) LCD (LED Backlight The use of any portable electronic trans- mission devices aboard aircraft is usually LCD Optional) prohibited.

  • Page 33: Led Indicators

    Quick Start Guide LED Indicators Icon Color Description The two sets of LED indicators (LED Status Indica- Orange DC Power is Plugged In tors and LED Power & Communication Indicators) on the computer display helpful information about the Green The Computer is On current status of the computer.

  • Page 34: Hot Key Buttons

    Quick Start Guide Hot Key Buttons These buttons give instant access to the default Internet browser and e-mail program, and allow you to toggle the Silent Mode on/off with one quick button press. Hot Key Function Activate the Default E-Mail Browser Activate the Default Internet Program Toggle *Silent Mode (for power saving) Table 1 - 4 - Hot Key Buttons...

  • Page 35: Keyboard

    Quick Start Guide Keyboard The keyboard has a numerical keypad for easy numeric data input, and features func- Other Keyboards tion keys to allow you to change operational features instantly. See Table 1 - 5, on page 1 - 14 for full function key combination details.

  • Page 36: Function/Hot Key Indicators

    Quick Start Guide Function/Hot Key Indicators The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations; visual indicators are available when the hot key utility is installed (see “Hot Key”...

  • Page 37: System Map: Front & Rear Views

    Quick Start Guide System Map: Front & Rear Views Figure 1 - 7 Model A Front & Rear Views LED Power & Com- munication Indica- Model B tors 7-in-1 Card Reader S/PDIF-Out Jack Microphone-In Jack Headphone-Out Model A Jack Battery Model B 7-in-1 Card Reader The card reader allows you to use the most popular digital storage card formats:...

  • Page 38: System Map: Left & Right Views

    Quick Start Guide System Map: Left & Right Views Figure 1 - 8 Left & Right Views Model A DC-In Jack RJ-45 LAN Jack External Monitor Model B Port Vent/Fan Intake/ Outlet 3 * USB 2.0 Ports ExpressCard Slot (see page Model A Optical Device Drive Bay (for CD/...
  • Page 39 Quick Start Guide Changing DVD Regional Codes Disk Eject Warning Go to the Control Panel and double-click Device Don’t try to eject a CD/DVD while the system is ac- Manager (Hardware and Sound), then click the + cessing it. This may cause the system to “crash”. Stop next to DVD/CD-ROM drives.

  • Page 40: System Map: Bottom View

    Quick Start Guide System Map: Bottom View Figure 1 - 9 Bottom View Battery (Model B 8 Cell Battery Overheating Pictured) Hard Disk Bay To prevent your computer from Cover overheating make sure nothing (3.5G Module blocks the Vent/Fan Intake while Model A Location) the computer is in use.

  • Page 41: Windows Vista Start Menu & Control Panel

    Quick Start Guide Windows Vista Start Menu & Control Panel Most of the control panels, utilities and programs within Windows Vista (and most other Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop.

  • Page 42: Video Features

    Video Features You can switch display devices, and configure display options, from the Display Settings control panel (in Per- sonalization) in Windows Vista as long as the appropriate Intel video driver is installed. For more detailed vid- eo information see “Intel Video Driver Controls”...
  • Page 43 Description Single Mode One of the connected displays is used as the display device Intel(R) Dual Display Clone Mode Both connected displays output the same view and may be configured independently Extended Desktop Mode Both connected displays are treated as separate devices, and act as a virtual desktop...

  • Page 44: Power Options

    Quick Start Guide Power Options The Power Options (Hardware and Sound menu) control panel icon in Windows (see page 19) allows you to configure power management features for your computer. You can conserve power by means of power plans and configure the options for the power button, sleep button, computer lid (when closed), display and sleep mode from the left menu.

  • Page 45: Features & Components

    Features & Components Chapter 2: Features & Components Overview Read this chapter to learn more about the following main features and components of the computer: • Hard Disk Drive • Optical (CD/DVD) Device • 7-in-1 Card Reader • ExpressCard Slot •...

  • Page 46: Hard Disk Drive

    Features & Components Hard Disk Drive The hard disk drive is used to store your data in the computer. The hard disk can be Power Safety taken out to accommodate other 2.5" serial (SATA) hard disk drives (see “Storage” on page C - 2) with a height of 9.5 mm.

  • Page 47: Optical (Cd/Dvd) Device

    Features & Components Optical (CD/DVD) Device There is a bay for a 5.25" optical (CD/DVD) device (12.7mm height). The actual de- Sound Volume vice will depend on the module you purchased (see “Storage” on page C - 2). The Adjustment optical device is usually labeled “Drive D:”...

  • Page 48: Handling Cds Or Dvds

    Features & Components Handling CDs or DVDs Proper handling of your CDs/DVDs will prevent them from being damaged. Please follow the advice below to make sure that the data stored on your CDs/DVDs can be CD Emergency Eject accessed. If you need to manually eject a CD (e.g.

  • Page 49: Dvd Regional Codes

    Features & Components DVD Regional Codes To change the DVD regional codes see “Changing DVD Regional Codes” on page 1 - DVD Regional Coding Table 2 - 1 Region Geographical Location DVD Regional Coding USA, Canada Western Europe, Japan, South Africa, Middle East &...

  • Page 50: 7-In-1 Card Reader

    Features & Components 7-in-1 Card Reader The card reader allows you to use some of the latest digital storage cards. Push the Card Reader Cover card into the slot and it will appear as a removable device, and can be accessed in the same way as your hard disk (s).

  • Page 51: Expresscard Slot

    Features & Components ExpressCard Slot The computer is equipped with an ExpressCard/34/54 slot that reads Express Card/ ExpressCard 34 and ExpressCard/54 formats. ExpressCards are the successors to PCMCIA (PC Slot Cover Cards). Make sure you install the Card Reader driver (see “CardReader”...

  • Page 52: Touchpad And Buttons/Mouse

    Features & Components TouchPad and Buttons/Mouse The TouchPad is an alternative to the mouse; however, you can also add a mouse to Mouse Driver your computer through one of the USB ports. The TouchPad buttons function in much the same way as a two-button mouse. If you are using an ex- ternal mouse your op- Once you have installed the TouchPad driver (see...

  • Page 53: Audio Features

    Features & Components Audio Features You can configure the audio options on your computer from the Sound control Sound Volume panel in Windows, or from the Realtek HD Audio Manager icon in the taskbar/ Adjustment control panel (right-click the taskbar icon to bring up an audio menu).

  • Page 54: Adding A Printer

    Features & Components Adding a Printer The most commonly used peripheral is a printer. The following conventions will Parallel Printer help you to add a printer; however it is always best to refer to the printer manual for specific instructions and configuration options. After setting up the print- er attach the parallel ca- ble to the printer.

  • Page 55: Power Management

    Power Management Chapter 3: Power Management Overview OS Note Power management To conserve power, especially when using the battery, your computer power man- functions will vary slight- agement conserves power by controlling individual components of the computer ly depending on your (the monitor and hard disk drive) or the whole system.

  • Page 56: The Power Sources

    Power Management The Power Sources The computer can be powered by either an AC/DC adapter or a battery pack. AC/DC Adapter Use only the AC/DC adapter that comes with your computer. The wrong type of AC/ DC adapter will damage the computer and its components. Attach the AC/DC adapter to the DC-in jack on the left of the computer.

  • Page 57: Turning On The Computer

    Power Management Turning on the Computer Now you are ready to begin using your computer. To turn it on simply press the pow- Shut Down er button on the front panel. Note that you should al- When the computer is on, you can use the power button as a Sleep/Hibernate hot- ways shut your comput- er down by choosing the key button when it is pressed for less than 4 seconds (pressing and holding the power...

  • Page 58: Power Plans

    Power Management Power Plans The computer can be configured to conserve power by means of power plans. You Resuming can use (or modify) an existing power plan, or create a new one. Operation The settings may be adjusted to set the display to turn off after a specified time, and Table 3 - 1, on to send the computer into Sleep after a period of inactivity.
  • Page 59 Power Management Each Windows power plan will also adjust the processor performance of your ma- chine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Choose High performance for maximum performance when the computer is pow- ered from an AC power source.

  • Page 60: Power-Saving States

    Power Management Power-Saving States You can use power-saving states to stop the computer’s operation and restart where Power Button you left off. Sleep is the default power-saving state in Windows Vista. The Power Button Earlier versions of Windows used Stand By and Hibernate as system power-saving in the Start Menu (in Classic View use the states.

  • Page 61: Hibernate

    Power Management Hibernate Hibernate uses the least amount of power of all the power-saving states and saves all of your information on a part of the hard disk before it turns the system off. If a Silent Mode power failure occurs the system can restore your work from the hard disk; if a power You can use Silent failure occurs when work is saved only to memory, then the work will be lost.

  • Page 62: Configuring The Power Buttons

    Power Management Configuring the Power Buttons The power/sleep button (Fn + F4 key combo) and closed lid may be set to send the Password computer in to a power-saving state. Protection It is recommended that you enable a password on wake up in order to protect your data.

  • Page 63: Resuming Operation

    Power Management Resuming Operation You can resume operation from power-saving states by pressing the power button, or in some cases pressing the sleep button (Fn + F4 key combo). Closing the Lid If you have chosen to Power Status To Resume Icon Color send the computer to...

  • Page 64: Battery Information

    Power Management Battery Information Please follow these simple guidelines to get the best use out of your battery. Low Battery Warning Battery Power When the battery is criti- Your computer’s battery power is dependent upon many factors, including the pro- cally low, immediately grams you are running, and peripheral devices attached.

  • Page 65: Conserving Battery Power

    Power Management Conserving Battery Power • Use a power plan that conserves power (e.g Power saver), however note that this may have an affect on computer performance. Windows Mobility Center • Lower the brightness level of the LCD display. The system will decrease LCD brightness slightly to save power when it is not powered by the AC/DC adapter.

  • Page 66: Battery Life

    Power Management Battery Life Battery life may be shortened through improper maintenance. To optimize the life and improve its performance, fully discharge and recharge the battery at least once every 30 days. We recommend that you do not remove the battery yourself. If you do need to re- move the battery for any reason see “Removing the Battery”...

  • Page 67: Proper Handling Of The Battery Pack

    Should you notice any physical defects (e.g. the battery is bent out of shape after being manufacturer. Discard dropped), or any unusual smells emanating from the notebook battery, shut your computer used battery according down immediately and contact your service center. If the battery has been dropped we do to the manufacturer’s in-...

  • Page 68: Battery Faq

    Power Management Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery. Don’t turn off the computer even if a message indicates the battery is critically low, just let the computer use up all of the battery power and shut down on its own.
  • Page 69 Power Management Scroll down to Battery and click + to expand the battery options. Choose the options below (click Yes if a warning appears): Figure 3 - 8 Power Options Advanced Settings - Battery • Low battery levels = 0% •...
  • Page 70 Power Management How do I fully charge the battery? When charging the battery, don’t stop until the LED charging indicator light changes from orange to green. How do I maintain the battery? Completely discharge and charge the battery at least once every 30 days or after about 20 partial discharges.

  • Page 71: Drivers & Utilities

    Module Driver Installation The procedures for installing drivers for the Wireless LAN, PC Camera, 3.5G, Fingerprint, and Intel Turbo Memory modules are provided in “Modules & Options” on page 7 - What to Install 4 - 1...

  • Page 72: Driver Installation

    Drivers & Utilities Driver Installation Check the driver installation order from Table 4 - 1, on page 4 - 3 (the drivers must be installed in Insert the Device Drivers & Utilities + User’s Manual this order) which is the same as that listed in the disc and click Install Drivers/Option Drivers (button).
  • Page 73 Page 7 - 20 soft website for download details, or contact your service center. Fingerprint Reader Module Page 7 - 30 Intel Turbo Memory Module Page 7 - 34 Table 4 - 1 - Driver Installation Driver Installation 4 - 3...

  • Page 74: Updating/Reinstalling Individual Drivers

    Drivers & Utilities Updating/Reinstalling Individual Drivers User Account Control (Win Vista) If you wish to update/reinstall individual drivers it If a User Account Control prompt appears as part of may be necessary to uninstall the original driver.To do the driver installation procedure, click Continue or this go to the Control Panel in the Windows OS and Allow, and follow the installation procedure as direct- double-click the Programs and Features icon (Pro-...

  • Page 75: Driver Installation Procedure

    Drivers & Utilities Driver Installation Procedure Modem Insert the Device Drivers & Utilities + User’s Manual 1. Click 4.Install Modem Driver > Yes. disc and click Install Drivers (button), or click Option 2. Click OK. Drivers (button) to access the optional driver menu. 3.

  • Page 76: Touchpad

    Drivers & Utilities TouchPad 1. Click 6.Install Touchpad Driver > Yes. 2. Click Next. Windows Update 3. Click Finish > Restart Now to restart the com- After installing all the drivers make sure you enable Win- puter. dows Update in order to get all the latest security up- dates etc.

  • Page 77: Optional Drivers

    7 - 30, and check the installation procedure. Figure 4 - 3 - Drivers Installer - Option Drivers Menu Intel Turbo Memory Technology Driver See the introduction in “Intel Turbo Memory Mod- Bluetooth Module ule” on page 7 -...
  • Page 78 Drivers & Utilities 4 - 8...

  • Page 79: Bios Utilities

    BIOS Utilities Chapter 5: BIOS Utilities Overview BIOS Settings Warning This chapter gives a brief introduction to the computer’s built-in software: Incorrect settings can cause your system to Diagnostics: The POST (Power-On Self Test) malfunction. To correct mistakes, return to Set- up and restore the Set- Configuration: The Phoenix Setup utility up Defaults with <F9>.

  • Page 80: The Power-On Self Test (Post)

    KBC/EC Firmware Revision: ******** pear slightly different. If you disable the Boot- CPU = 1 Processors Detected, Cores per Processor = 2 Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz time Diagnostic Screen, 2036M System RAM Passed the POST screen will not...

  • Page 81: Failing The Post

    BIOS Utilities Failing the POST Errors can be detected during the POST. There are two categories, “fatal” and “non- fatal”. Fatal Errors These stop the boot process and usually indicate there is something seriously wrong with your system. Take the computer to your service representative or authorized service center as soon as possible.

  • Page 82: The Setup Utility

    BIOS Utilities The Setup Utility The Phoenix Setup Utility tells the system how to configure itself and manage basic features and subsystems (e.g. port configuration). Entering Setup To enter Setup, turn on the computer and press F2 during the POST. The prompt (Press F2 to Enter Setup) seen on page 5 - 2 is usually present for a few seconds...

  • Page 83: Setup Screens

    BIOS Utilities Setup Screens The following pages contain additional advice on portions of the Setup. Setup Menus Along the top of the screen is a menu bar with menu headings. When you select a Setup menus heading, a new screen appears. Scroll through the features listed on each screen to shown in this section are make changes to Setup.

  • Page 84: Main Menu

    BIOS Utilities Main Menu Phoenix SecureCore(tm) Setup Utility Figure 5 - 2 Main Main Advanced Security Boot Exit Main Menu Item Specific Help System Time: [22:12:05] System Date: [04/20/2008] <Tab>, <Shift Tab>, or SATA Port 1 [FUJITSU MHY2080BH-(PM)] <Enter> selects field. SATA Port 2 [TSSTcorp CDDVDW TS-L633A-] System Memory...

  • Page 85: Sata Port 1 (Main Menu)

    BIOS Utilities SATA Port 1 (Main Menu) Pressing Enter opens the sub-menu to show the configuration of a HDD on the com- puter’s Serial ATA Port 1. Use the Auto (Type:) setting to have the items configured automatically for you. SATA Port 2 (Main Menu) Pressing Enter opens the sub-menu to show the configuration of an optical Device on the computer’s Serial ATA Port 2.

  • Page 86: Advanced Menu

    BIOS Utilities Advanced Menu Phoenix SecureCore(tm) Setup Utility Main Advanced Advanced Security Boot Exit Item Specific Help Advanced Chipset Control Installed O/S: [Vista] Select options for SATA Mode Selection: [AHCI] Advanced Chipset DFOROM(Robson) Support: [Disabled] features. Figure 5 - 3 Reset Configuration Data: [No] Boot-time Diagnostic Screen:...

  • Page 87: Installed O/S (Advanced Menu)

    This item will only be available if you have selected AHCI in SATA Mode Selec- tion. The option should be enabled only if you have included an optional Intel Tur- bo Memory Module in your purchase configuration. You should then install the driver as per the instructions in “Intel Turbo Memory Module”...

  • Page 88: Reset Configuration Data (Advanced Menu)

    BIOS Utilities Reset Configuration Data (Advanced Menu) This item is set to No as default. You can change the setting to Yes if you have in- stalled a new add-on which has reconfigured the system, resulting in such a serious system conflict that the operating system is unable to boot.

  • Page 89: Security Menu

    BIOS Utilities Security Menu Phoenix SecureCore(tm) Setup Utility Security Menu Security Main Advanced S S e e c c u u r r i i t t y y Boot Exit Item Specific Help changes Supervisor Password Is: Clear make here affect the User Password Is: Clear Supervisor Password...

  • Page 90: Set User Password (Security Menu)

    BIOS Utilities Set User Password (Security Menu) You can set a password for user mode access to the Phoenix SecureCore Setup Utility. This will not affect access to the computer OS, (only the Setup utility) unless Password Warning you choose to set a Password on Boot (see below). Many menu items in the Phoenix If you set a boot pass- SecureCore Setup Utility cannot be modified in user mode.

  • Page 91: Boot Menu

    BIOS Utilities Boot Menu Phoenix SecureCore(tm) Setup Utility Figure 5 - 5 Main Advanced Security Boot Exit Boot Menu Item Specific Help Boot priority order: USB KEY: Keys used to view or IDE FDC: configure devices: IDE CD: Optiarc CDRWDVD CRX890S-(P Up and Down arrows USB CDROM: select a device.

  • Page 92: Exit Menu

    BIOS Utilities Exit Menu Figure 5 - 6 Phoenix SecureCore(tm) Setup Utility Main Advanced Security Boot Exit Exit Menu Item Specific Help Exit Saving Changes Exit Discarding Changes Exit System Setup and Load Setup Defaults save your changes to CMOS. Discard Changes Save Changes Help...

  • Page 93: Upgrading The Computer

    Upgrading The Computer Chapter 6: Upgrading The Computer Overview This chapter contains information on upgrading the computer. Follow the steps out- lined to make the desired upgrades. If you have any trouble or problems you can con- Warranty Warning tact your service representative for further help. Before you begin you will need: Please check with your service representative...

  • Page 94: When Not To Upgrade

    Upgrading The Computer When Not to Upgrade These procedures involve opening the system’s case, adding and sometimes replac- ing parts. Power Safety Warning You should not perform any of these upgrades if: Before you undertake upgrade proce- • Your system is still under warranty or a service contract dures, make sure that •...

  • Page 95: Removing The Battery

    Upgrading The Computer Removing the Battery If you are confident in undertaking upgrade procedures yourself, for safety reasons Warranty Warning it is best to remove the battery. Turn the computer off, and turn it over. Please check with your Slide the latch in the direction of the arrow.

  • Page 96: Upgrading The Hard Disk Drive

    Upgrading The Computer Upgrading the Hard Disk Drive The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard HDD System disk drives with a height of 9.5mm (h) (see “Storage” on page C - 2). Follow your Warning operating system’s installation instructions, and install all necessary drivers and util- ities (see...
  • Page 97 Upgrading The Computer Lift the hard disk up in the direction of arrow Remove the screws & and cover Reverse the process to install a new hard disk drive. Figure 6 - 3 HDD & Cover Removal Upgrading the Hard Disk Drive 6 - 5...

  • Page 98: Upgrading The Optical (Cd/Dvd) Device

    Upgrading The Computer Upgrading the Optical (CD/DVD) Device Turn off the computer, and turn it over and remove the battery. Locate the RAM & CPU bay cover and remove screws Carefully (a fan and cable are attached to the under side of the cover) lift up the bay cover.

  • Page 99: Upgrading The System Memory (Ram)

    Upgrading The Computer Upgrading the System Memory (RAM) The computer has two memory sockets for 200 pin Small Outline Dual In-line (SO- DIMM) DDRII (DDR2) type memory modules (see “Memory” on page C - 2 details of supported module types). The total memory size is automatically detected by the POST routine once you turn on your computer.
  • Page 100 Upgrading The Computer Carefully (a fan and cable are attached to the under side of the cover) lift up the bay cover. Carefully disconnect the fan cable , and remove the cover Figure 6 - 6 CPU/RAM Bay Cover Removed Contact Warning Be careful not to touch the metal pins on the...
  • Page 101 Upgrading The Computer The RAM module will pop-up, and you can remove it. Figure 6 - 8 RAM Module Removal Pull the latches to release the second module if necessary. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.

  • Page 102: Upgrading The Processor

    Upgrading The Computer Upgrading the Processor If you want to upgrade your computer by replacing the existing processor with a fast- Warranty er/new one you will need to contact your customer service representative. We rec- ommend that you do not do this yourself, since if it is done incorrectly you may The CPU is not a user damage the processor or mainboard.

  • Page 103: Modules & Options

    • Fingerprint Reader Module • Intel Turbo Memory Module Important Notice If your purchase option includes both Wireless LAN and 3.5G modules, then the appropri- ate antennas will be installed. Note that In order to comply with FCC RF exposure compli- ance requirements, the antenna must not be co-located or operate in conjunction with any other antenna or transmitter.

  • Page 104: Bluetooth Module

    Modules & Options Bluetooth Module The operating system’s Bluetooth Devices control panel is used to configure the Wireless Device Bluetooth settings in Windows Vista, and therefore does not require a driver. Use the Operation Aboard Fn + F12 key combination (see “Function/Hot Key Indicators”...

  • Page 105: Bluetooth Configuration In Windows Vista

    Modules & Options Bluetooth Configuration in Windows Vista Setup your Bluetooth Device so the Computer Can Find it Turn your Bluetooth device (e.g. PDA, mobile phone etc.) on. Bluetooth Taskbar Make the device discoverable (to do this check your device documentation). Icon If you cannot see the To Turn the Bluetooth Module On...
  • Page 106 Modules & Options To Add a Bluetooth Device Access the Bluetooth Devices control panel. Click Options (tab), and make sure that Allow Bluetooth devices to connect to this computer check box (Connections) has a tick inside it. Click Devices (tab), and then click Add. The Add Bluetooth Device Wizard will appear.
  • Page 107 Modules & Options To Change Settings for the Bluetooth Device Access the Bluetooth Devices control panel. Click on the device you want to change and click Properties to: Bluetooth Help • Change the name of the device (click General, type a new name and click OK). •...

  • Page 108: Wireless Lan Module

    Note: The operating system is the default setting for Wireless LAN control in Win- dows Vista (see page Note: The Intel® Wi-Fi Link 5300 Series WLAN module is not available as an op- tion for Model B computers with an LED Backlight LCD.

  • Page 109: 802.11 B/G Wlan Driver Installation

    Modules & Options 802.11 b/g WLAN Driver Installation 1. Make sure the module is powered on, then insert the Device Drivers & Util- ities + User’s Manual disc into the CD/DVD drive. 2. Click Option Drivers (button). 3. Click 1.Install WLAN Driver > Yes. 4.

  • Page 110: Connecting To A Wireless Network

    Modules & Options Connecting to a Wireless Network Make sure the Wireless LAN module is turned on. Click the taskbar wireless icon , and then click Connect to a network (or right- click the icon , and then click Connect to a network). Figure 7 - 5 Taskbar Menus Click icon...
  • Page 111 Modules & Options Click a network, and then click Connect. If you do not see a network you want to connect to, click Set up a connection or network (a list of options will appear allowing manual searching, and creating a new network).
  • Page 112 Modules & Options To disconnect from the wireless network you can click the taskbar wireless icon and then select Connect or disconnect to access the network menu, and click Disconnect (or right-click the icon , and then click Disconnect from). Security Enabled Networks You should try to make...

  • Page 113: Windows Mobility Center

    Modules & Options Windows Mobility Center The Windows Mobility Center control panel provides an easy point of access for information on battery status, power plans used and wireless device status etc. To access the Windows Mobility Center: Click Start, and click Control Panel (or point to Settings and click Control Panel).

  • Page 114: Pc Camera Module

    Modules & Options PC Camera Module The PC Camera module uses the BisonCap application to capture video files and to Latest PC Camera take pictures. Before installing the driver, make sure that the optional PC Camera is Driver Information Check the Device Driv- ers &...

  • Page 115: Pc Camera Driver Installation

    Modules & Options PC Camera Driver Installation 1. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/ DVD drive. 2.0M PC Camera 2. Click Option Drivers (button). Screen Refresh 3. Click 2.Install Camera Driver > Yes. The 2.0M PC Camera 4.
  • Page 116 Modules & Options PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. Click Start, and click Control Panel (or point to Settings and click Control Panel).
  • Page 117 Modules & Options Figure 7 - 11 Audio Setup for PC Camera Right-click PC Camera Module 7 - 15...
  • Page 118 Modules & Options BisonCap BisonCap is a video viewer for general purpose video viewing and testing, and for capturing video files to .avi format. Pre-Allocating File Space Run the BisonCap program from the Start > Programs/All Programs > Bison- Cam menu (it is recommended that you set the capture file before the capture You may pre-allocate process - see Set Capture File below).
  • Page 119 Modules & Options Reducing Video File Size Note that capturing high resolution video files requires a substantial amount of disk space for each file. After recording video, check the video file size (right-click the file and select Properties) and the remaining free space on your hard disk (go to My Computer, right-click the hard disk, and select Properties).
  • Page 120 Modules & Options Eliminating Screen Flicker If you find that the video screen in the BisonCap program is flickering, you can try to adjust the setting in the Video Capture Filter options. Run the BisonCap program. Go to Options and scroll down to select Video Capture Filter..Click either 50Hz or 60Hz under Frequency in Property Page (tab).
  • Page 121 Modules & Options Zoom The BisonCap program allows you to zoom the camera in and out. Run the BisonCap program. Go to Zoom and select Zoom Out/Zoom In. Figure 7 - 13 Zoom/Setting Taking Still Pictures Snapshot Folder The BisonCap program allows you to take still pictures. The Snapshot folder’s default location is on the Run the BisonCap program.

  • Page 122: 3.5G Module

    Modules & Options 3.5G Module If you have included an optional 3.5G module (see “Communication” on page A - Power Safety for specification details) in your purchase option, you will have the appropriate Warning software provided for your module. Follow the instructions below to install the USIM card (which will be provided by your service provider), and then install the Before you undertake any installation proce-...
  • Page 123 Modules & Options Insert the USIM card as you would into your mobile phone. The 3.5G module is pictured on the left, and the installed USIM card on the right in Figure 7 - Figure 7 - 15 Module and USIM Card Location Slide the SIMLOCK in the direction of the arrow (Figure 7 -...
  • Page 124 Modules & Options Insert the USIM card as illustrated in (Figure 7 - 17) and close the SIMLOCK. Figure 7 - 17 Insert the USIM Card Close the SIMLOCK by pushing it in the direction of the arrow in Figure 7 - Figure 7 - 18 SIMLOCK Lock 10.

  • Page 125: 3G Watcher Application

    Modules & Options 3G Watcher Application With the 3.5G module and USIM card (provided by your service provider) installed you may then install the 3G Watcher application. The 3.5G Watcher application al- Wireless Device Operation Aboard lows you to directly access your 3.5G internet service from the computer. Aircraft 3G Watcher Application Installation The use of any portable...
  • Page 126 Modules & Options Setting Up a Carrier Profile Although the connection information is stored on the USIM card supplied by the ser- vice provider, you will need to set up the appropriate carrier profile from the 3G Watcher software. Power on the 3.5G module using the Fn + key combination (the icon will be green).
  • Page 127 Modules & Options You can then enter a new profile name or choose a profile from the drop-down list provided by the software (see the sidebars for information on the profile details). Figure 7 - 21 User Options Profile Information Profile Details Click General and/or Ad- vanced (and the sub-...
  • Page 128 Modules & Options Connecting to the Service Provider Power on the 3.5G module using the Fn + key combination (the icon will be green). You can access the 3G Watcher application from the Start menu (Start > Programs/All Programs > Sierra Wireless > 3G Watcher), or by clicking the desktop icon The software will run and display the service provider name (see “Setting Up a...
  • Page 129 Modules & Options When the connection is successful a taskbar notification will appear (as below). Figure 7 - 25 Connected Taskbar Notification You can then access the internet, download e-mail etc. as per any internet connection. While you are connected the taskbar icon will be green (it will be red when the program is running but not connected).
  • Page 130 Modules & Options 12. If you click the 3G Watcher close icon a message will be displayed asking you to click OK to confirm the program exit. Figure 7 - 27 Exit Warning 13. Exiting the program DOES NOT turn off the 3.5G module, and you will need to press the Fn + key combination to turn off the module (pay careful attention to this aboard aircraft - see...

  • Page 131: Short Messaging Service

    Modules & Options Short Messaging Service In addition to standard internet services you may also send and receive SMS text messages using the 3G Watcher program, if your service supports SMS. Reading SMS Messages The SMS message indicator in the main window will notify you of any new messages received.

  • Page 132: Fingerprint Reader Module

    Modules & Options Fingerprint Reader Module If you have included the fingerprint reader in your purchase option you will need to Help & Manual install the driver as per the instructions below. Right-click the taskbar icon Make sure you have administrator’s rights to your computer, and have a Windows to bring up the menu to password enabled for full security protection.

  • Page 133: User Enrollment

    Modules & Options User Enrollment Click Start > Programs/All Programs > Protector Suite QL > User Enrollment, or double click the taskbar icon Click Initialize. Figure 7 - 28 Initialize Fingerprints On the first run of the program you will be asked to click the button to accept the license, and then click OK.
  • Page 134 Modules & Options If you have not set a Windows password you will be prompted to do so (note: If you have not set a password Protector Suite QL cannot secure access to your computer). Click Next. You will then be prompted to enter your Windows password and click Next. Select either to use the fingerprint reader alone for authentication, or choose both the fingerprint reader and the Windows password, and then click Next.
  • Page 135 Modules & Options 11. Click the button above any of the fingers to begin the enrollment process for that finger. 12. Swipe the finger five times to enroll that finger. Fingerprint 13. Repeat the process for all the fingers you wish to enroll (see sidebar), and then Enrollment click Next.
  • Page 136 Modules & Options 17. Right-click the taskbar icon to bring up the Control Center that allows you to Edit Fingerprints, register applications, manage Password Bank, File Safe and access the Help menu etc. You can also run the Control Center etc. from the Protector Suite QL item in the Programs/All Programs menu.

  • Page 137: Fingerprint Control Center Features

    Modules & Options Fingerprint Control Center Features Application Launcher The Application Launcher allows you to register applications to be launched when assigned to a particular finger. Simply copy the application icon on to one of the reg- istered fingers and ten click OK to close the application window. Once registered the application will launch when you swipe the appropriate finger across the sensor.

  • Page 138: Intel Turbo Memory Module

    Intel Turbo Memory Technology is sup- ported in Windows Vista only (it also supports Windows Vista features such as ReadyBoost, ReadyDrive, and Superfetch).
  • Page 139 9. Click 5.Install TurboMemory Driver > Yes. 10. Click Next > Yes > Next > Next. 11. Click Finish. 12. Run the Intel ® Turbo Memory Console from the Programs/All Pro- grams menu (Intel ® Turbo Memory). Figure 7 - 33...
  • Page 140 Modules & Options 7 - 38...

  • Page 141: Troubleshooting

    Troubleshooting Chapter 8: Troubleshooting Overview Should you have any problems with your computer, before consulting your service representative, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find the answer in these pages, make sure you have followed the instructions carefully and observed the safety precautions in the preface.

  • Page 142: Basic Hints And Tips

    Troubleshooting Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer ap- pears not to be working. • Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip, make sure it is actually working.

  • Page 143: Backup And General Maintenance

    Troubleshooting Backup and General Maintenance • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases, e.g. in a CD wal- let.

  • Page 144: Viruses

    Troubleshooting Viruses • Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm your computer and cause you to lose data. Anti-Virus programs are commercially available and the defini- tions file updates are usually downloadable directly from the internet.

  • Page 145: Upgrading And Adding New Hardware/Software

    Troubleshooting Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system. • Don’t open your computer or undertake any repair or upgrade work if you are not comfortable with what you are doing.
  • Page 146 Troubleshooting • Thoroughly check any recent changes you made to your system as these changes may affect one or more system components, or software programs. If possible, go back and undo the change you just made and see if the problem still occurs. •...

  • Page 147: Problems And Possible Solutions

    Troubleshooting Problems and Possible Solutions Problem Possible Cause - Solution You turned on the power but it doesn’t Battery missing / incorrectly installed. Check the battery bay, make sure the work. battery is present and seated properly (the design of the battery only allows it to go in one way).
  • Page 148 18). Make sure you’re using the correct adapter. Make sure that your notebook is completely powered off before putting it into a travel bag (or any such container). Putting a notebook which is powered on in a travel bag may cause the Vent/Fan intakes to be blocked.
  • Page 149 Troubleshooting Problem Possible Cause - Solution You forget the boot password. If you forget the password, you may have to discharge the battery of the CMOS. Contact your service representative for help. Password Warning If you choose to set a boot password, NEVER forget your password. The consequences of this could be serious. If you cannot remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.
  • Page 150 Troubleshooting Problem Possible Cause - Solution Other Keyboards If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will detect and enable it automatically. However special functions/hot keys unique to the system’s regular keyboard may not work.
  • Page 151 Troubleshooting Problem Possible Cause - Solution The PC Camera module cannot be The module is off. Press the Fn + F10 key combination in order to enable the detected. module (see “Function/Hot Key Indicators” on page 1 - 14). Run the BisonCap program to view the camera picture.
  • Page 152 Troubleshooting Problem Possible Cause - Solution The Hibernate function has disappeared. You have a computer with 4GB of RAM and have installed Windows Vista Serv- ice Pack 1. This is a known issue if your computer has 4GB of RAM and is run- ning Windows Vista Service Pack 1.

  • Page 153: Interface (Ports & Jacks)

    Interface (Ports & Jacks) Appendix A: Interface (Ports & Jacks) Overview The following chapter will give a quick description of the interface (ports & jacks) which allow your computer to communicate with external devices, connect to the internet etc. Interface (Ports & Jacks) A - 1...

  • Page 154: Notebook Ports And Jacks

    Interface (Ports & Jacks) Notebook Ports and Jacks Item Description Card Reader Port The card reader allows you to use some of the latest digital storage cards. Push the card into the slot and it will appear as a removable device.
  • Page 155 Interface (Ports & Jacks) Item Description RJ-45 LAN Jack This port supports LAN (Network) functions. Note: Broadband (e.g. ADSL) modems usually connect to the LAN port. Security Lock Slot To prevent possible theft, a Kensington-type lock can be attached to this slot. Locks can be purchased at any computer store.
  • Page 156 Interface (Ports & Jacks) A - 4...

  • Page 157: Intel Video Driver Controls

    DVMT automatically and dynamically allocates as much (up to 256MB) sys- tem memory (RAM) as needed to the video system (the video driver must be in- stalled). DVMT returns whatever memory is no longer needed to the operating system. Intel Video Driver Installation B - 1...

  • Page 158: B - 2 Intel Graphics Properties

    Intel Video Driver Controls Intel Graphics Properties More advanced video configuration options are provided by the Intel(R) Graphics Taskbar Icon Media Accelerator Driver for mobile control panel. The Intel GMA control Open the Display Settings control panel (see “Video Features” on page 1 - panel can also be ac- and click Advanced Settings (button).
  • Page 159 Display Selection At least one other dis- play must be attached in order to view multiple Display Selection op- tions. Figure B - 2 Intel Graphics Media Accelerator Driver for mobile (Control Panel Tabs) Intel Graphics Properties B - 3...

  • Page 160: Scheme Options

    Open the Display Settings control panel and click Advanced Settings (button). the actual application executable (.exe) file, Click the Intel(R)... tab and click Graphics Properties (button). not just the shortcut. To Configure your display configuration, resolution etc. as per your requirements from find the application right- Display Settings.

  • Page 161: Attaching Other Displays

    • Notebook Only • External Display Only Configuring Other Displays from Windows Vista • Notebook + External Attach your external display to the external monitor port, and turn it on. Display If a New Display Detected window does not appear in Windows Vista, go to the Make sure you give the Windows Mobility Center control panel (Mobile PC >...
  • Page 162 Intel Video Driver Controls ® Configuring Other Displays from Intel GMA Driver for Mobile Go to the Intel(R) GMA Driver for mobile control panel (see “Intel Graphics Properties” on page B - 2) and click Display Devices. Display Selection Click to choose the display mode from the Operating Mode menu.

  • Page 163: Display Modes

    Only one of your attached displays is used. Click Video Settings (button) in the Intel(R) Intel(R) Dual Display Clone (mirrored) GMA Driver for mobile This mode will drive multiple displays with the same content. Each device may be control panel to access configured independently for different resolutions, refresh rates, color quality etc.
  • Page 164 Intel Video Driver Controls To Enable Intel(R) Dual Display Clone Attach your external monitor to the external monitor port, and turn it on. Go to the Intel(R) GMA Driver for mobile control panel (see “Intel Graphics Properties” on page B - 2) and click Display Devices.
  • Page 165 Intel Video Driver Controls To Enable Extended Desktop Attach your external monitor to the external monitor port, and turn it on. Go to the Intel(R) GMA Driver for mobile control panel (see “Intel Graphics Display Settings Properties” on page B - 2) and click Display Devices.
  • Page 166 Intel Video Driver Controls Using Windows Vista to Enable Extended Mode Attach your external display to the external monitor port, and turn it on. If a New Display Detected window does not appear in Windows Vista, go to the Display Settings Windows Mobility Center control panel (Mobile PC >...
  • Page 167 Intel Video Driver Controls Using Display Settings to Enable Extended Mode Attach your external display to the external monitor port, and turn it on. Open the Display Settings control panel (see “Video Features” on page 1 - 20). Click the monitor icon (e.g.
  • Page 168 Intel Video Driver Controls B - 12...

  • Page 169: Specifications

    2.53 GHz Intel® Core™2 Duo Processor 45nm (45 Nanometer) Process Technology 25W - (478-pin) Micro-FC-PGA Package - Socket-P 3MB On-die L2 Cache & 1006MHz FSB P8400/ P8600 2.4/ 2.53 GHz Core Logic Intel GM45 + ICH9M Chipset Specifications C - 1...

  • Page 170: Lcd

    Supports Dual Channel DDRII (DDR2) SDRAM Two 200 Pin SO-DIMM Sockets Supporting DDRII (DDR2) 667MHz/800MHz RAM Modules Memory Expandable up to 4GB (1024/2048 MB DDR2 Modules) Intel Turbo Memory (Robson) NAND Flash 2G Memory Card Module (Factory Option) Video Adapter Intel GM45 Integrated Video...

  • Page 171: Audio

    Specifications Feature Specification Audio High Definition Audio (HDA) Direct Sound 3D™ Compatible Compliant with Microsoft UAA (Universal Audio 2 * Built-In Speakers Architecture) Built-In Microphone Keyboard & Winkey Keyboard Built-In TouchPad with Scrolling Function Pointing Device Interface Three USB 2.0 Ports One RJ-11 Modem Jack One Headphone-Out Jack One RJ-45 LAN Jack...
  • Page 172 Azalia 56K Modem V.90 & V.92 Compliant Wireless LAN Modules: Intel® WiFi Link 5300 Series (3*3 - 802.11a/g/n) Wireless LAN Mini-Card Module (Option - not available for Model B computers with LED backlight) Intel® WiFi Link 5100 Series (1*2 - 802.11a/g/n) Wireless LAN Mini-Card Module (Option) 3rd Party 802.11b/g Wireless LAN Mini-Card Module with USB interface (Option)

  • Page 173: Environmental Spec

    Specifications Feature Specification Power Supports ACPI 3.0 Supports Wake on LAN Management Supports Resume from Modem Ring Power Full Range AC/DC Adapter AC Input 100 - 240V, DC Output 50 - 60Hz, 19V, 3.42A or 18.5V, 3.5A (65 Watts) Battery 4 Cell Smart Lithium-Ion Battery Pack, 14.8V/2.4AH 8 Cell Smart Lithium-Ion Battery Pack, 14.8V/4.4AH (Option) Environmental...

  • Page 174: Optional

    Memory Card Module (Factory Option) SATA DVD Dual (Super Multi) Drive Module Fingerprint ID Reader Module (Factory Option) Intel® WiFi Link 5300 Series (3*3 - 802.11a/g/n) Wireless LAN Mini-Card Module (not available for UMTS/HSPDA-based 3.5G Module with Mini Card Model B computers with LED backlight)

  • Page 175: Windows Xp Information

    Windows XP Information Appendix D: Windows XP Information This Appendix contains information (including control panel information, driver installation etc.) for users of the Windows XP OS. D - 1...

  • Page 176: Dvd Regional Codes

    Windows XP Information DVD Regional Codes Changing DVD Regional Codes Go to the Control Panel and double-click System > Hardware (tab), click Device Manager, then click the + next to DVD/CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties dialogue box, and select the DVD Region (tab) to bring up the control panel to allow you to adjust the regional code.

  • Page 177: Windows Xp Start Menu & Control Panel

    Windows XP Information Windows XP Start Menu & Control Panel Most of the control panels, utilities and programs within Windows XP (and most other Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop.

  • Page 178: D - 4 Touchpad And Buttons/Mouse

    Windows XP Information TouchPad and Buttons/Mouse The TouchPad is an alternative to the mouse; however, you can also add a mouse to your computer through one of the USB ports. The TouchPad buttons function in much the same way as a two-button mouse. Once you have installed the TouchPad driver (see “TouchPad”...

  • Page 179: Function/Hot Key Indicators

    Windows XP Information Function/Hot Key Indicators The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations; visual indicators are available when the hot key utility is installed (see “Hot Key”...

  • Page 180: Audio Features

    Windows XP Information Audio Features You can configure the audio options on your computer from the Sounds and Audio Devices Windows con- trol panel, or from the Realtek HD Audio Manager icon in the taskbar/control panel (this will bring up the Realtek Audio Configuration menus).

  • Page 181: Video Features

    Click the Intel(R) Graphics Media Accelerator Driver for Mobile tab, and click Graphics Properties (button) to make any video adjustments you require. You can also access Graphics Properties from the Windows Intel(R) GMA Driver for Mobile control panel, or from the taskbar icon Dynamic Video Memory Technology ®...
  • Page 182 Graphics Properties. If you cannot see the tray icon go to the Intel(R) Graphics Media Accelerator Driver for Mobile tab and click the “Show Tray Icon” tickbox. Alternatively right-click the desktop and select Graph- ics Options >...
  • Page 183 You can use the Fn + F7 key combination to toggle through the display options: • Notebook Only • External Display Only • Notebook + External Display Make sure you give the displays enough time to refresh. Help Menus Right-click on many of the items in the tabs to bring up the “What’s This?”...
  • Page 184 Intel Display Mode Description Single Display One of the connected displays is used as the display device Multiple Display - Intel(R) Both connected displays output the same view and may be configured independently Dual Display Clone Multiple Display - Both connected displays are treated as separate devices, and act as a virtual...

  • Page 185: Attaching Other Displays

    At least one other dis- Attach your external display to the external monitor port, and turn it on. play must be attached in Go to the Intel(R) GMA Driver for mobile control panel and click Display order to view multiple Devices.
  • Page 186 To Enable Intel(R) Dual Display Clone (Intel GMA) Attach your external display to the external monitor port, and turn it on. Go to the Intel(R) GMA Driver for mobile control panel and click Display Devices. Click to choose Intel(R) Dual Display Clone (Operating Mode).
  • Page 187 To Enable Extended Desktop (Intel GMA) Attach your external display to the external monitor port, and turn it on. Go to the Intel(R) GMA Driver for mobile control panel and click Display Devices. Click to choose Extended Desktop (Operating Mode).
  • Page 188 Windows XP Information To Enable Extended Desktop (Windows Display Properties) Attach your external monitor to the external monitor port, and turn it on. Click Start, point to Settings (or click Control Panel) and click Control Panel (if you are in Category View choose Appearance and Themes).

  • Page 189: Power Management Features

    Windows XP Information Power Management Features To conserve power, especially when using the battery, your computer uses the ACPI OS Note power management system. Power management conserves power by controlling in- dividual components of the computer (the monitor and hard disk drive) or the whole Power management system.

  • Page 190: D - 16 The Power Sources

    Windows XP Information The Power Sources The computer can be powered by either an AC/DC adapter or a battery pack. AC/DC Adapter Use only the AC/DC adapter that comes with your computer. The wrong type of AC/DC adapter will damage the computer and its components.

  • Page 191: Turning On The Computer

    Windows XP Information Turning on the Computer Now you are ready to begin using your computer. To turn it on simply press the pow- Shutdown er button on the front panel. Note that you should al- When the computer is on, you can use the power button as a Stand by/Hibernate/ ways shut your comput- er down by choosing the Shutdown hot-key button when it is pressed for less than 4 seconds (pressing and...

  • Page 192: Power Schemes

    Windows XP Information Power Schemes You can set your computer to conserve power through individual components by Resuming means of Power Schemes. You can also adjust the settings for each scheme to set Operation the monitor to turn off after a specified time, and the computer's hard disk motor to turn off if the hard disk drive has not been accessed for a specified period of time (if Press a key on the key- the system reads or writes data, the hard disk motor will be turned back on).
  • Page 193 Windows XP Information Each Windows Power Scheme will also adjust the processor performance of your machine in order to save pow- er. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Choose the Home/Office Desk scheme for maximum performance when the computer is powered from an AC power source.

  • Page 194: Hibernate Mode Vs. Shutdown

    Windows XP Information System Power Options You can use the system power options to stop the computer’s operation and restart Stand by/Hibernate where you left off. This system features Stand by and Hibernate sleep mode levels or Shutdown Error (Hibernate mode will need to be enabled by clicking the option in the Hibernate tab in the Power Options control panel - see “Hibernate”...
  • Page 195 Windows XP Information Stand by Stand by saves the least amount of power, but takes the shortest time to return to full operation. During Stand by the hard disk is turned off, and the CPU is made to idle System Resume at its slowest speed.

  • Page 196: D - 22 Configuring The Power Button

    Windows XP Information Configuring the Power Button The power button may be set to send the computer in to either Stand by or Hiber- Sleep Button nate mode. In Stand by mode, the LED will blink green. In Hibernate mode the LED will be off (battery) or orange (AC/DC adapter).

  • Page 197: Battery Information

    Windows XP Information Battery Information Please follow these simple guidelines to get the best use out of your battery. Low Battery New Battery Warning Always completely discharge, then fully charge, a new battery (see “Battery FAQ” When the battery is criti- on page D - 26 for instructions on how to do this).

  • Page 198: Recharging The Battery With The Ac/Dc Adapter

    Windows XP Information Battery life may be shortened through improper maintenance. To optimize the life and improve its perfor- mance, fully discharge and recharge the battery at least once every 30 days. We recommend that you do not remove the battery yourself. If you need to remove the battery for any reason, “Removing the Battery”...
  • Page 199 Should you notice any physical defects (e.g. the battery is bent out of shape after being dropped), or any unusual smells emanating from the notebook battery, shut your computer down immediately and contact your service center. If the battery has been dropped we do not recommend using it any further, as even if the computer continues to work with a dam- aged battery in place, it may cause circuit damage, which may possibly result in fire.

  • Page 200: Battery Faq

    Windows XP Information Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery. Don’t Caution turn off the computer by yourself even when you see a message that indicates the bat- Danger of explosion if tery is critically low, just let the computer use up all of the battery power and shut battery is incorrectly re-...

  • Page 201: Driver Installation

    Windows XP Information Driver Installation 1. Check the driver installation order from Table 5 (the drivers must be installed in this order) which is the Insert the Device Drivers & Utilities + User’s Manual same as that listed in the Drivers Installer menu below.
  • Page 202 Windows XP Information Updating/Reinstalling Individual Drivers WinXP SP2 Driver Page # If you wish to update/reinstall individual drivers it may be necessary to uninstall the original driver.To do this go Chipset Page D - 29 to the Control Panel in the Windows OS and double- click the Add/Remove Programs item.

  • Page 203: Driver Installation Procedure

    Windows XP Information Driver Installation Procedure Insert the Device Drivers & Utilities + User’s Manual disc, click Install Drivers/Option Drivers (button) and Windows XP Service Pack 2 then click the appropriate driver name from the Drivers Make sure you install Windows XP Service Pack 2 (or a Installer menu.
  • Page 204 Windows XP Information Modem TouchPad 1. Click 4.Install Modem Driver > Yes. 1. Click 6.Install Touchpad Driver > Yes. 2. Click OK. 2. Click Next > Next > Next. 3. The modem is ready for dial-up configuration. 3. Click Finish to restart the computer. CardReader 1.

  • Page 205: Bluetooth Module

    Windows XP Information Module Drivers Bluetooth Module See the following pages for the driver installation pro- Note: The operating system is the default setting for cedures for any of the optional modules included in Bluetooth control in Windows XP, and does not re- your purchase configuration.

  • Page 206: D - 32 Bluetooth Module

    Windows XP Information Wireless LAN, Bluetooth & 3.5G Modules Bluetooth Module The operating system’s Bluetooth Devices control panel is used to configure the Bluetooth settings in Wireless Device Operation Aboard Aircraft Windows XP, and therefore does not require a driver. The use of any portable electronic transmission devices Use the Fn + F12 key combination (see “Function/...
  • Page 207 Windows XP Information Bluetooth Local Area Connection Icon If you want to display the Local Area Connection icon for the Bluetooth connection in the taskbar, set it up as follows: Wireless Device Operation Aboard Access the Network Connections control panel in Windows (Start > Settings > Aircraft Network Connections OR Start >...

  • Page 208: Bluetooth Configuration In Windows Xp

    Windows XP Information Bluetooth Configuration in Windows XP Setup your Bluetooth Device so the Computer Can Find it Bluetooth Taskbar 1. Turn your Bluetooth device (e.g. PDA, mobile phone etc.) on. Icon 2. Make the device discoverable (to do this check your device documentation). If you cannot see the To Turn the Bluetooth Module On Bluetooth icon in the...

  • Page 209: To Add A Bluetooth Device

    Windows XP Information To Add a Bluetooth Device Access the Bluetooth Devices control panel. Click Options (tab), and make sure that Allow Bluetooth devices to connect to this computer check box (Connections) has a tick inside it. Click Devices (tab), and then click Add. The Add Bluetooth Device Wizard will appear.
  • Page 210 Windows XP Information To Change Settings for the Bluetooth Device 1. Access the Bluetooth Devices control panel. 2. Click on the device you want to change and click Properties to: Bluetooth Module & • Change the name of the device (click General, type a new name and click OK). Resuming From •...

  • Page 211: Wireless Lan Module

    Table 1 - 3, on page 1 - 11). Note: The Intel® Wi-Fi Link 5300 Series WLAN module is not available as an op- tion for Model B computers with an LED Backlight LCD. Wireless LAN Module D - 37...
  • Page 212 12. Click the button to accept the license and click Next > Next > Next. 13. Click Finish to complete the installation. 14. Configure the settings by going to the Intel PROSet Wireless WiFi Connection Utility (Start > Pro- grams/All Programs > Intel PROSet Wireless WiFi Connection Utility), or by double-clicking the taskbar icon 15.
  • Page 213 Windows XP Information 17. Click Help (link) to bring up the Help Menu. 18. Make sure that the WiFi On button is selected. Figure D - 23 - Intel PROSet Wireless WiFi Connection Utility Wireless LAN Module D - 39...
  • Page 214 Windows XP Information 802.11b/g WLAN Driver Installation 1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual disc into the CD/DVD drive. Network 2. Click Option Drivers (button). Connection 3. Click 1.Install WLAN Driver > Yes. Use the Windows Net- 4.

  • Page 215: Pc Camera Module

    Windows XP Information PC Camera Module The PC Camera module uses the BisonCap application to capture video files and to Taking Still Pictures take pictures. Before installing the driver, make sure that the optional PC Camera is Double-click Computer icon on the Use the Fn + F10 key combination (see “Function/Hot Key Indicators”...
  • Page 216 Windows XP Information PC Camera Driver Installation 1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual disc into the CD/DVD drive. 2. Click Option Drivers (button). 3. Click 2.Install Camera Driver > Yes. 4.
  • Page 217 Windows XP Information PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. Go to the Start menu and point to Settings (or just click Control Panel) and click Control Panel, then double- click the Sounds &...
  • Page 218 Windows XP Information BisonCap BisonCap is a video viewer for general purpose video viewing and testing, and for capturing video files to .avi format. Pre-Allocating File Space 1. Run the BisonCap application from the Start > Programs/All Programs > Bison- Cam menu (it is recommended that you set the capture file before the capture You may pre-allocate process - see Set Capture File below).
  • Page 219 Windows XP Information Reducing Video File Size Note that capturing high resolution video files requires a substantial amount of disk space for each file. After recording video, check the video file size (right-click the file and select Properties) and the remaining free space on your hard disk (go to My Computer, right-click the hard disk, and select Properties) If necessary you can remove the recorded video file to a removable medium e.g.
  • Page 220 Windows XP Information Eliminating Screen Flicker If you find that the video screen in the BisonCap program is flickering, you can try to adjust the setting in the Video Capture Filter options. 1. Run the BisonCap program. 2. Go to Options and scroll down to select Video Capture Filter..3.
  • Page 221 Windows XP Information Zoom The BisonCap programs allows you to zoom the camera in and out. Run the BisonCap program. Go to Zoom and select Zoom Out/Zoom In. Go to Options and scroll down to select Setting (Use the slider to adjust the zoom level, and click OK to save the setting).

  • Page 222: 3.5G Module

    Windows XP Information 3.5G Module If you have included an optional 3.5G module in your purchase option follow the instructions on page 7 - 20 install the USIM card (which will be provided by your service provider), and then install the application. Before installing the application, make sure that the 3.5G module is on.

  • Page 223: Fingerprint Reader Module

    Windows XP Information Fingerprint Reader Module If you have included the fingerprint reader in your purchase option you will need to TPM Modules Help & Manual install the driver as per the instructions below. There are TWO TPM Right-click the taskbar icon Make sure you have administrator’s rights to your computer, and have a Windows security chip mod- to bring up the menu to...
  • Page 224 Windows XP Information User Enrollment Click Start > Programs/All Programs > Protector Suite QL > User Enrollment, or double-click the taskbar icon Click Initialize. On the first run of the program you will be asked to click the button to accept the license, and then click OK. Click Next and select “Enrollment to the hard disk”, and click Finish.
  • Page 225 Windows XP Information 11. Swipe the finger five times to enroll that finger. 12. Repeat the process for all the fingers you wish to enroll (see sidebar), and then click Next > Finish. 13. Click “Help” in the Fingerprint Control Center to get more information on any topic. 14.

  • Page 226: Fingerprint Control Center Features

    Windows XP Information Fingerprint Control Center Features Application Launcher The Application Launcher allows you to register applications to be launched when assigned to a particular fin- ger. Simply copy the application icon on to one of the registered fingers and ten click OK to close the application window.

Table of Contents