Yamaha RHINO YXR66FSEW Owner's Manual page 212

1. Drive select lever a. L (Low)
b. H (High) c. N (Neutral)
1. Sélecteur de marche a. L (gamme basse)
b. H (gamme haute) c. N (point mort)
d. R (marche arrière)
1. Palanca selectora de marcha
b. H (marcha larga)
d. R (marcha atrás)
d. R (Reverse)
a. L (marcha corta)
c. N (punto muerto)
Shifting: Neutral to Reverse
1. Stop the vehicle. Keep your foot off the accel-
erator pedal.
2. Apply the brake pedal.
3. Shift from neutral to reverse or vice versa by
moving the drive select lever along the shift
guide.
NOTE:
_
G
When in reverse, the reverse indicator light
should be on. If the light does not come on,
ask a Yamaha dealer to inspect the reverse
indicator light electrical circuit.
G
Due to the synchronizing mechanism in the
engine, the light may not come on until the
vehicle starts moving.
_
4. Check behind for people or obstacles, then
release the brake pedal.
5. Press the accelerator pedal gradually and
continue to watch to the rear while backing.
6-17