Bkne-1011 Editing Fader Panel - Sony DNE-1000 Operation Manual

BKNE-1011 Editing Fader Panel

For details of the use of the knobs and levers on the control
panel, refer to the BZNE-2020 User's Guide.
1 Function knobs
2 Faders
1 2 3
10
9
8
7
6
5
4
3
2
1
0
Operating panel
1 Function knobs
Turn these knobs to adjust the parameters assigned to
them.
2 Faders
You can use faders 1 to 4 to adjust the audio level of
any of the four audio tracks, or use the master fader
(fader M ).
3 Function indicators
Indicate information about function knobs 1 or
transition lever 5 operation.
4 Audio indicators
Indicate information about audio outputs.
3 Function indicators
4 Audio indicators
5 Transition lever
KNOB
4 M
LEVER
INPUT
MIX
10 10
1 2
3 4
9 9
L R
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
0 0
6 Transition lever adjustment screw hole
7 Audio meters
Connector panel
5 Transition lever
Use this to carry out a manual effect transition.
6 Transition lever adjustment screw hole
To adjust the stiffness of movement of the transition
lever 5, insert a Phillips screwdriver into this hole,
and turn.
7 Audio meters
These show the audio channels selected with the GUI
and the monitor output levels or the program output
levels of those channels.
8 CONTROL PANEL connector (D-sub 25-pin,
female)
Connect this to the FADER PANEL connector of the
BKNE-1010 Editing Control Panel.
CONTROL PANEL
8 CONTROL PANEL
connector
9(E)