Table of Contents
Advertisement
To Ensure Safe Use
About
About the Symbols
The
of the symbol is determined by the design contained within the triangle. The symbol at
left means "danger of electrocution."
The
The specific thing that must not be done is indicated by the design contained within the
circle. The symbol at left means the unit must never be disassembled.
The
must be done is indicated by the design contained within the circle. The symbol at left
means the power-cord plug must be unplugged from the outlet.
Do not disassemble, repair, or modify.
Doing so may lead to fire or abnormal op-
eration resulting in injury.
Do not use with any electrical power
supply that does not meet the ratings
displayed on the unit.
Use with any other power supply may lead
to fire or electrocution.
Use only with the power cord included
with this product.
Use with other than the included power cord
may lead to fire or electrocution.
Do not spill combustible liquid over
the platen.
Doing so may cause fire.
Do not place any potentially flam-
mable object on the platen while the
heater is in operation.
Doing so may cause fire.
2
and
Used for instructions intended to alert the user to the risk of death or
severe injury should the unit be used improperly.
Used for instructions intended to alert the user to the risk of injury or
material damage should the unit be used improperly.
* Material damage refers to damage or other adverse effects caused
with respect to the home and all its furnishings, as well to domestic
animals or pets.
symbol alerts the user to important instructions or warnings. The specific meaning
symbol alerts the user to items that must never be carried out (are forbidden).
symbol alerts the user to things that must be carried out. The specific thing that
Notices
Ground the unit with the ground wire.
Failure to do so may result in risk of electro-
cution in the event of a mechanical problem.
Do not use while in an abnormal state
(i.e., emitting smoke, burning odor,
unusual noise, or the like).
Doing so may result in fire or electrocution.
Immediately switch off the power, unplug the
power cord from the electrical outlet, and
contact your authorized Roland DG Corp.
dealer or service center.
Do not connect the power cord with
other electrical loads on a single elec-
trical outlet.
Doing so may generate heat and cause fire.
Advertisement
Table of Contents
