Table of Contents
Advertisement
3-1 Daily Maintenance
When cleaning the platen, first switch off the controller and the sub power for the printer.
Failure to do so may cause burns when the platen is hot.
Never clean with solvents (such as benzine or thinners).
Doing so may cause fire when the platen is hot.
Periodically clean the platen. Buildup of grime may soil printed media and make correct detection of media width impossible.
Cleaning the Platen
Moisten a cloth with neutral detergent diluted with water, wring dry, and wipe gently.
For buildup of cutting dust on the platen, use a commercially available brush to brush it away toward the front. When
doing this, never use a metal brush.
Cleaning the Controller
Use a cloth moistened with water then wrung well, and wipe gently to clean. Wipe the control panel and display gently
with a clean, soft cloth.
22
3. Other Information
Advertisement
Table of Contents
