LG WT17DSBP Service Manual page 32

4-8. TR OUB LE S HOOTIN G M E THOD S A CCOR D IN G TO E R R OR M E S S A G E
For more detailed information for trouble shooting refer to page 46 to 57.
ERROR DECISION
ERROR
BASIS
WATER WATER LEVEL does
SUPPLY not rise to the set
& INLET level in 12 minutes.
V/V.
Water is not
completely drained
DRAINAGE
in 12 minutes.
ry unbalance
during spin.
UNBALANCE
In the second QC
OVER
Mode the following
FLOODING message is displayed.
ERROR
When water is
CAUSE FOR ERROR
OCCURRENCE
Water faucet is closed?
Water supply is interrupted.
the inlet valve.
Valve connector has bad
contact to the P.W.B ASM.
rain hose located
properly?
rain hose is not lowered.
rain hose is folded or clogged
due to freeze or dirts.
Drain Motor connector to the
P.W.B ASM has bad connection.
ry in the INNER TUB is
Washer is tilted.
S.F S/W is too closed to the
washing tub, or has bad contact.
TOR of Ball
pressure sensor disconnected
or badly tonched?
32
REMEDY
water faucet.
Wait until water supply is
resumed.
rts.
ove.
rain hose at 0.9~1.3m
high. (For pump)
ower.
(For : Non-pump)
rain hose.
rain Motor or correct
the connector contact.
inner tub.
ck and replace S.F S/W.
ck B.P SENSOR
CONNECTOR or replace B.P
sensor
between 0.9 ~ 1.2 m (36
and 48 inches) above the
Floor.
switch
objects in pressure sensor
switch air hose.
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only training and service purposes.
r.