LG WT17DSBP Service Manual page 28

Inlet Valve
2) Disassembly of Back Panel, Power
Cord, Inlet Valve & BP Sensor
①
back side.
② Disassemble the back panel.
③ Disconnect two connectors and disassemble
the power cord.
④
leads form the inlet valve.
⑤ Remove the inlet valve.
⑥ Disconnect the leads & the pressure tube from
the BP sensor.
⑦ Remove the BP sensor.
28
Copyright © 2017 LG Electronics Inc. All rights reserved.
Only training and service purposes.