Resuming Playback from
the Point Where You
Stopped the Disc
Resume)
The player stores the point where you stopped
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. When you store a resume playback point
for the seventh disc, the resume playback
point for the first disc is deleted.
1
While playing a disc, press x to
stop playback.
"RESUME" appears on the front panel
display.
2
Press H.
The player starts playback from the point
where you stopped the disc in step 1.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
Notes
• "MULTI-DISC RESUME" in "CUSTOM
SETUP" must be set to "ON" (default) for this
function to work (page 68).
(Multi-disc
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
• Resume Play does not work during Shuffle Play
and Program Play.
• When playing CDs, DATA CDs and DVD-RWs
(VR mode), the point where you stopped is
cleared when:
– you press DISC SKIP or DISC SELECT.
– you opened the disc tray.
– you disconnect the power cord.
– the player enters standby mode (DATA CD only)
• This function may not work with some discs.
• If "MULTI-DISC RESUME" in "CUSTOM
SETUP" is set to "ON" and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.
31